The Cordless Drill ECDL12456 is a 12V drilling and screwdriving tool intended for assembly, fitting, installation, maintenance and compatible workshop tasks. It provides 20Nm maximum torque, a 0–750rpm no-load speed, a 0.8–10mm plastic chuck and 15+1 torque settings for different drilling and fastening requirements. The EMTOP ECDL12456 is supplied with a 1.5Ah battery pack and 65mm Cr-V bit, while the charger is sold separately. IndustrialAdda supports B2B procurement across Delhi NCR and eligible Pan-India requirements depending on product availability, quantity and delivery conditions.
The ECDL12456 is a 12V cordless drill designed for compatible drilling and screwdriving work where moderate torque, compact chuck capacity and cordless portability are required. Its 20Nm maximum torque, 15+1 settings and 0–750rpm speed make it relevant to installers, maintenance teams, furniture fitters and workshop users.
The product combines drilling and controlled screwdriving within one cordless tool.
Its 0.8–10mm chuck capacity determines the stated range of compatible accessories that can be held by the chuck.
For fastening applications, the 15+1 setting configuration allows users to select between multiple torque positions and the drill setting according to the task.
The supplied battery also includes a USB Type-C charging port, while the actual charger is listed separately from the package.
The ECDL12456 is defined by its 12V operating platform, 20Nm maximum torque, 0–750rpm speed and 0.8–10mm chuck capacity. It also provides 15+1 torque settings and comes with a 1.5Ah battery pack, giving procurement teams clear specifications for drilling and fastening applications.
20Nm Maximum Torque
The drill provides:
Maximum torque: 20Nm
Torque is particularly relevant when the tool is being evaluated for screwdriving and fastening work.
Buyers should compare this value with the actual fastener and application requirements rather than selecting the drill solely by voltage.
0–750rpm No-Load Speed
The specified speed range is:
0–750rpm
This provides a clear operating-speed reference for compatible drilling and screwdriving operations.
No second mechanical speed range has been supplied for this model.
0.8–10mm Plastic Chuck
The ECDL12456 uses a plastic chuck with a stated capacity of:
0.8–10mm
Chuck capacity should be checked against the drill bits and other compatible accessories intended for the job.
15+1 Torque Settings
The tool provides:
15+1 torque settings
This gives users multiple selectable settings for compatible screwdriving work, plus the additional drill setting.
For assembly operations involving different fasteners, selectable torque settings can help operators adapt the tool setup to the task.
12V Cordless Platform
The ECDL12456 operates at:
12V
Its cordless configuration allows drilling and fastening away from a continuously connected mains supply.
This can be relevant to installers, maintenance personnel and mobile technicians working across several locations.
1.5Ah Battery Included
The package contains:
1 × 1.5Ah EBPK12153 battery pack
No runtime or charging duration has been provided, so these values should not be estimated.
The ECDL12456 supports compatible drilling, screwdriving and fastening across assembly, furniture fitting, installation, maintenance and workshop operations. Its 20Nm torque and 10mm chuck configuration make it more appropriate to evaluate for controlled general-purpose work than for high-torque impact fastening or heavy rotary-hammer drilling.
Assembly and Fastening Work
Assembly operations frequently involve driving screws into prepared components or putting together mechanical, furniture or fixture assemblies.
The 15+1 torque settings allow the drill to be configured for different compatible fastening requirements.
For repeat production or assembly work, buyers should verify the fastener type and required torque before standardizing the tool.
Furniture Fitting
Furniture installation can involve drilling pilot holes and driving screws during fitting or adjustment.
The cordless format supports movement around cabinets, furniture assemblies and interior installation areas without keeping the drill connected to mains power.
The 0.8–10mm chuck provides the key bit-size reference for procurement.
Installation Tasks
Installers may need to drill suitable holes and subsequently secure components.
Using one cordless drill for both operations can simplify a portable tool kit where the drilling and fastening requirements fall within the ECDL12456 specification.
Maintenance Operations
Maintenance staff regularly encounter small drilling, fastening and adjustment tasks around workshops, equipment areas or facilities.
A 12V cordless drill can be useful for compatible jobs where portability is more relevant than the higher torque associated with impact wrenches or larger drills.
Workshop Drilling
The ECDL12456 can support suitable workshop drilling operations using compatible bits within the stated chuck range.
No material-specific drilling capacities have been supplied, so maximum capacities in wood, steel, masonry or other materials should not be invented.
On-Site Repair Work
Mobile technicians can carry the drill for compatible adjustment, fitting and fastening work away from a permanent workstation.
Its battery-powered format reduces dependence on a nearby outlet during individual tool operations.
The EMTOP ECDL12456 is a 12V Cordless Drill with 20Nm maximum torque, 0–750rpm no-load speed and a plastic chuck accepting 0.8–10mm accessories. It provides 15+1 torque settings and is supplied with a 1.5Ah battery and 65mm Cr-V bit.
Specification |
ECDL12456 Details |
|
Product Name |
Cordless Drill |
|
Brand |
EMTOP |
|
Model Number |
ECDL12456 |
|
Product Category |
Cordless Tools |
|
Product Type |
Cordless Drill |
|
Voltage |
12V |
|
No-Load Speed |
0–750rpm |
|
Maximum Torque |
20Nm |
|
Chuck Type |
Plastic Chuck |
|
Chuck Capacity |
0.8–10mm |
|
Torque Settings |
15+1 |
|
Included Bit |
1 × Cr-V 65mm Bit |
|
Battery Included |
1 × 1.5Ah EBPK12153 |
|
Battery Charging Port |
USB Type-C |
|
Charger |
Sold Separately |
|
Packaging |
Color Box |
No motor type, tool weight, material-specific drilling capacity, runtime, charging time, impact function or maximum fastener size has been supplied.
These specifications should not be inferred from other cordless drills.
The ECDL12456 is supplied with one 1.5Ah EBPK12153 battery pack, and the battery has a USB Type-C charging port. The product specification separately states that the charger is sold separately, so buyers should clarify the complete charging requirement when submitting an order.
This point is particularly important for first-time procurement.
The supplied configuration contains:
Charger: Sold separately
The USB Type-C reference applies to the battery charging port.
No charger model, charging power, cable specification or charging duration has been provided.
Buyers should therefore avoid assuming that a particular USB charger is included with the tool.
The ECDL12456 combines drilling and screwdriving within a straightforward 12V cordless configuration. Its 20Nm maximum torque, selectable 15+1 settings and 10mm chuck make it relevant where users need a portable general-purpose drill for compatible assembly, fitting and maintenance work rather than higher-torque impact applications.
The product's value comes from matching its specifications to the correct workload.
For screwdriving, the multiple torque settings are a significant feature.
For drilling, the 0.8–10mm chuck range defines the accessory interface.
For mobile work, the included battery removes the need for continuous mains connection during operation.
The charger-sold-separately arrangement should also be factored into quotation comparisons so procurement teams compare like-for-like package configurations.
IndustrialAdda supports B2B procurement for the EMTOP ECDL12456 through exact model verification, quotation assistance, quantity-based requirements and multi-product sourcing. IndustrialAdda acts as the supplier and is not represented as the manufacturer, OEM, designer or technology developer of the Cordless Drill.
Buyers should identify the product as:
Product: Cordless Drill
Brand: EMTOP
Model: ECDL12456
Voltage: 12V
Maximum Torque: 20Nm
IndustrialAdda can assist with:
Where the drill forms part of a wider tool requirement, buyers can submit multiple model codes or a complete BOM.
More supplier information is available through the IndustrialAdda About Us page.
IndustrialAdda primarily supports Cordless Drill procurement across Delhi NCR from its New Delhi location. Eligible business and project requirements from other parts of India can also be reviewed according to product availability, required quantity, destination and individual commercial conditions.
Primary Supply Region
Industrial buyers can submit requirements from:
Potential users include manufacturing businesses, installation contractors, furniture operations, maintenance teams, workshops, construction companies and MRO departments.
Pan-India Procurement
Businesses outside Delhi NCR may submit their ECDL12456 requirements for quotation review.
Eligible Pan-India supply depends on:
No fixed MOQ, stock level or delivery timeline has been provided for this model.
Project buyers should confirm availability before planning the tool against a fixed deployment date.
To request the EMTOP ECDL12456, provide IndustrialAdda with the exact drill model, required quantity and delivery location. Because the charger is sold separately, buyers should also clarify whether they need charging equipment in addition to the supplied 1.5Ah battery pack.
For an accurate enquiry, share:
For bulk or project procurement, additional cordless-tool codes, battery models and other industrial requirements can be submitted through the IndustrialAdda Contact Us page.
The ECDL12456 is intended for compatible drilling, screwdriving, fastening, assembly, installation, furniture fitting and maintenance work. Its 12V platform, 20Nm maximum torque and 15+1 settings make it relevant to general-purpose tasks where controlled cordless drilling and fastening are required.
The EMTOP ECDL12456 has a specified maximum torque of 20Nm. It also provides 15+1 torque settings for compatible screwdriving and drilling operations. Buyers should match the torque capability with their intended fasteners and application before procurement.
The ECDL12456 uses a plastic chuck with a 0.8–10mm capacity. Drill bits and other compatible accessories should therefore be checked against this chuck range before purchase or use. No material-specific maximum drilling capacities are provided in the supplied specifications.
The Cordless Drill is supplied with one 1.5Ah EBPK12153 battery pack. The battery has a USB Type-C charging port. The supplied product information does not state battery runtime or charging duration, so these should not be assumed.
For assembly teams, installers, furniture operations, maintenance departments or workshops requiring a compact cordless drilling and screwdriving tool, submit your requirement for the EMTOP ECDL12456 Cordless Drill to IndustrialAdda. Include the exact model, quantity and delivery destination, and specify whether additional batteries or charging equipment are required because the charger is sold separately. For project, repeat or bulk purchasing, buyers can also provide related cordless-tool model numbers, technical specifications or a complete BOM for coordinated quotation review. IndustrialAdda can support eligible B2B supply across Delhi NCR and other Indian locations subject to current product availability and order conditions.
| Voltage | 12V |
|---|---|
| No-load speed | 0-750rpm |
| Max torque | 20NM |
| Chuck | Plastic chuck |
| Chuck capacity | 0.8-10mm |
| Torque settings | 15+1 |
| Include | 1 Pcs Cr-V 65mm bit |
| Battery pack | 1pcs 1.5Ah battery pack(EBPK12153) |
| Battery charging port | USB type-C |
| Charger | Charger sold separately |
| Packaging | Packed by color box |
No. The product specification explicitly states that the charger is sold separately. Buyers should therefore include their charging requirement when requesting a quotation if they do not already have the necessary charging equipment for the supplied EBPK12153 battery.
IndustrialAdda supports B2B procurement enquiries for the Emtop ECDL12456 Cordless Drill across Delhi NCR. Buyers can provide the model number, required quantity, charging requirement and delivery location to request current availability and commercial quotation information.
Eligible Pan-India requirements may be supported depending on product availability, order quantity, destination and applicable commercial conditions. Businesses outside Delhi NCR should submit the ECDL12456 model number, quantity and delivery destination for supply review.
Submit the ECDL12456 model number, required quantity, delivery location and any battery or charger requirements to IndustrialAdda . If several cordless tools are being sourced for a workshop or project, procurement teams can also provide related model codes, technical specifications or a complete BOM.
Fill in your details and our B2B team will contact you shortly.
