The Cordless Impact Drill ECIDL12206 is a 12V drilling, screwdriving and impact-drilling tool configured for installation, maintenance, assembly and compatible masonry work. It provides 20Nm maximum torque, two no-load speed ranges up to 1500rpm, and a maximum impact rate of 22,500bpm. The EMTOP ECIDL12206 also includes a 0.8–10mm chuck, 18+1+1 torque settings and an integrated LED work light. Two 1.5Ah batteries, three masonry drill bits and a Cr-V bit are supplied, while the charger is sold separately. IndustrialAdda supports B2B procurement across Delhi NCR and eligible Pan-India requirements.
The ECIDL12206 is a 12V cordless impact drill designed to combine conventional drilling, controlled screwdriving and impact-assisted drilling within one tool. Its 20Nm maximum torque, two operating speed ranges and 22,500bpm maximum impact rate make it relevant to installation, workshop, maintenance and compatible masonry-drilling requirements.
An impact drill adds an impact action to normal rotary drilling.
This distinguishes the ECIDL12206 from a basic cordless drill when the application involves compatible masonry-related drilling.
At the same time, the tool retains selectable torque settings for screwdriving and standard drilling work.
The supplied 18+1+1 setting configuration therefore reflects its multi-mode role.
For buyers, the key distinction is not simply that this is another 12V drill—it provides a specified impact function and includes three masonry drill bits in the package.
The ECIDL12206 combines 20Nm maximum torque with two stated speed ranges, a maximum 22,500bpm impact rate and 18+1+1 torque settings. Its 0.8–10mm chuck and integrated LED work light add practical functionality for drilling and fastening in workshop, installation and maintenance environments.
Two No-Load Speed Ranges
The supplied speed specification is:
The lower speed range can be relevant where controlled screwdriving or lower-speed drilling is required.
The higher range provides a faster operating option for compatible drilling tasks.
Maximum Impact Rate of 22,500bpm
The impact drill provides a maximum impact rate of:
22,500bpm
This is the key specification differentiating the tool from a standard drill-only configuration.
Impact action may be used for compatible masonry drilling when an appropriate drill bit is installed.
No maximum masonry drilling diameter has been supplied and should not be assumed.
20Nm Maximum Torque
The ECIDL12206 delivers:
Maximum torque: 20Nm
Torque is particularly relevant when evaluating the tool for screwdriving, fastening and assembly tasks.
Buyers should compare this rating against the intended fastener and workload.
18+1+1 Torque Settings
The supplied configuration provides:
18+1+1 settings
This gives operators multiple torque selections alongside drilling and impact-drilling functions.
For tasks involving several fastener types or work stages, selectable settings provide more flexibility than a fixed operating configuration.
0.8–10mm Chuck Capacity
The impact drill uses a plastic chuck with a specified capacity of:
0.8–10mm (1/32–3/8 inch)
Drill bits and accessories should be selected within this chuck range.
Integrated LED Work Light
An integrated LED work light is included.
This provides localized illumination around the drilling or fastening point and can be useful around furniture assemblies, equipment areas, installation points or other locations with limited visibility.
The ECIDL12206 is suited to applications where workers need more than simple drilling. It can support compatible screwdriving, assembly, installation and impact-assisted drilling tasks, making it relevant to maintenance teams, furniture fitters, contractors, fabrication support personnel and workshop users handling varied light-duty cordless-tool requirements.
Installation and Fixing Work
Installation teams may need to drill a hole and then secure the associated fixture or component.
The ECIDL12206 allows both drilling and screwdriving functions to be handled with the same cordless tool where the work falls within its specifications.
Its LED work light can also support visibility around the immediate fixing location.
Compatible Masonry Drilling
The supplied package includes three masonry drill bits, and the tool provides an impact mode with up to 22,500bpm.
This makes impact-assisted drilling one of the product's core functional distinctions.
Procurement teams should still confirm the required hole size and material because no material-specific maximum drilling capacities are provided.
Furniture Fitting and Assembly
Furniture fitting often involves pilot drilling, screw insertion and repeated adjustments.
The 18+1+1 settings give users selectable control for compatible fastening operations.
The 10mm maximum chuck capacity also provides a clear accessory-selection reference.
Workshop Maintenance
A workshop maintenance technician may encounter screws, brackets, panels or minor drilling requirements during one service job.
Having drilling, screwdriving and impact-drilling functions within one cordless unit can reduce the need to switch between several basic tools for compatible tasks.
Fabrication Support
Fabrication operations sometimes require auxiliary drilling and fastening during assembly, fitting or installation.
The ECIDL12206 may support these secondary operations where its 20Nm torque and chuck specifications align with the job.
On-Site Repair Work
Mobile repair teams frequently work away from fixed benches and permanent power points.
A battery-operated impact drill can be carried between individual work locations and used for compatible drilling or fastening without remaining connected to mains power.
The EMTOP ECIDL12206 is a 12V Cordless Impact Drill with two no-load speed ranges up to 1500rpm, 22,500bpm maximum impact rate and 20Nm maximum torque. It uses a 0.8–10mm plastic chuck and provides 18+1+1 torque settings.
Specification |
ECIDL12206 Details |
|
Product Name |
Cordless Impact Drill |
|
Brand |
EMTOP |
|
Model Number |
ECIDL12206 |
|
Product Category |
Cordless Tools |
|
Product Type |
Cordless Drill |
|
Voltage |
12V |
|
No-Load Speed |
0–400 / 0–1500rpm |
|
Maximum Impact Rate |
22,500bpm |
|
Maximum Torque |
20Nm |
|
Chuck Type |
Plastic Chuck |
|
Chuck Capacity |
0.8–10mm (1/32–3/8") |
|
Torque Settings |
18+1+1 |
|
Work Light |
Integrated LED |
|
Cr-V Bit |
1 × 65mm |
|
Masonry Drill Bits |
3 pcs |
|
Batteries Included |
2 × 1.5Ah EBPK12153 |
|
Battery Charging Port |
USB Type-C |
|
Charger |
Sold Separately |
|
Packaging |
Carrying Case |
No motor type, material-specific drilling capacity, battery runtime, charging duration, tool weight or dimensions have been supplied.
These values should not be inferred from other models.
The ECIDL12206 package includes two 1.5Ah batteries, three masonry drill bits, one 65mm Cr-V bit and a carrying case. The batteries incorporate a USB Type-C charging port, while the charger itself is sold separately, making charging equipment an important point to clarify during procurement.
The supplied package consists of:
Battery charging port: USB Type-C
Charger: Sold separately
This two-battery configuration differs from a single-battery cordless drill package and should be considered when comparing quotations.
No specific charging cable, charger model or charging time is identified in the provided data.
The ECIDL12206 is relevant where a buyer needs one compact cordless tool for screwdriving, normal drilling and compatible impact-assisted drilling. Its 22,500bpm maximum impact rate and 18+1+1 settings provide functionality beyond a standard drilling-only model while retaining a 12V cordless format.
For procurement teams, the product can be evaluated through the task sequence.
If work primarily involves routine screwdriving, selectable torque settings matter.
Where conventional drilling is required, the two-speed configuration and 10mm chuck are key specifications.
When compatible masonry drilling is part of the workload, the impact function and supplied masonry bits become more relevant.
This makes the ECIDL12206 particularly suitable for mixed application requirements rather than a single repetitive function.
IndustrialAdda supports B2B sourcing of the EMTOP ECIDL12206 through model verification, quotation assistance, quantity-based purchasing and multi-product industrial procurement. IndustrialAdda acts as the supplier and is not presented as the manufacturer, OEM, product designer or technology developer of the Cordless Impact Drill.
For purchasing documentation, identify:
Product: Cordless Impact Drill
Brand: EMTOP
Model: ECIDL12206
Voltage: 12V
Torque: 20Nm
IndustrialAdda can support requirements involving:
For larger purchasing requirements, buyers can submit several cordless-tool model numbers together with associated batteries, accessories or other industrial products.
More supplier information is available through the IndustrialAddaAbout Us page.
IndustrialAdda primarily supports B2B Cordless Impact Drill requirements across Delhi NCR from New Delhi. Eligible project, workshop and industrial requirements from other parts of India can also be reviewed depending on current availability, order quantity, destination and applicable commercial conditions.
Delhi NCR Supply
Requirements may originate from businesses in:
Potential buyers include:
Pan-India Requirements
Businesses outside Delhi NCR may also request the EMTOP ECIDL12206.
Pan-India fulfilment remains dependent on current product availability, quantity and destination.
No stock quantity, minimum order quantity or fixed delivery period has been provided.
Buyers working to specific project schedules should request availability confirmation before finalizing deployment plans.
To request the EMTOP ECIDL12206, send IndustrialAdda the exact model number, quantity and delivery destination. Where the drill is being purchased for impact-drilling work, buyers may also mention the application and accessory requirements. Charger requirements should be clarified because the charger is not included.
A complete procurement enquiry can include:
For project or bulk procurement, buyers can submit cordless-tool codes, battery requirements, accessory lists or a complete BOM through the IndustrialAdda Contact Us page.
The ECIDL12206 supports compatible drilling, screwdriving, fastening and impact-assisted drilling applications. It can be relevant to installation work, furniture fitting, workshop maintenance, fabrication support and on-site repair where users need one cordless tool for several drilling and fastening functions.
The Cordless Impact Drill has a specified maximum impact rate of 22,500bpm. This impact function differentiates it from a standard drill-only model and supports compatible impact-assisted drilling applications when an appropriate drill bit is fitted.
The EMTOP ECIDL12206 has two specified no-load speed ranges: 0–400rpm and 0–1500rpm. The different ranges allow users to select a lower or higher operating speed according to the compatible screwdriving or drilling requirement.
The ECIDL12206 uses a plastic chuck with a capacity of 0.8–10mm (1/32–3/8 inch). Buyers should match drill bits and compatible accessories to this chuck range before procurement or use.
For installation teams, maintenance departments, furniture fitting operations, workshops or contractors requiring drilling, screwdriving and compatible impact-drilling capability in one cordless tool, submit your requirement for the EMTOP ECIDL12206 Cordless Impact Drill to IndustrialAdda. Include the model number, quantity, delivery location and any additional bit, battery or charging requirements. Since the charger is sold separately, mention whether charging equipment is needed. For bulk or project purchasing, procurement teams can also send associated product codes, technical requirements or a complete BOM for coordinated quotation review.
| Voltage | 12V |
|---|---|
| No-load speed | 400/0-1500rpm |
| Max impact rate | 22500bpm |
| Max torque | 20Nm |
| Chuck | Plastic chuck |
| Chuck capacity | 0.8-10mm(1/32-3/8") |
| Torque settings | 18+1+1 |
| Integrated LED work light | Integrated LED work light |
| Include | 1 Pcs Cr-V 65mm bit |
| Masonry drill bits | 3 Pcs masonry drill bits |
| Battery pack | 2 Pcs 1.5Ah battery pack(EBPK12153) |
| Battery charging port | USB type-C |
| Charger | Charger sold separately |
| Packaging | Packed by carrying case |
The package includes two 1.5Ah EBPK12153 batteries, three masonry drill bits, one 65mm Cr-V bit and a carrying case. The batteries have USB Type-C charging ports. The charger is explicitly listed as sold separately.
No. The supplied product information states that the charger is sold separately. Procurement teams should therefore include charging equipment in the enquiry if required rather than assuming it is part of the standard ECIDL12206 package.
IndustrialAdda supports B2B procurement enquiries for the Emtop ECIDL12206 Cordless Impact Drill across Delhi NCR. Buyers can provide the model number, required quantity, charging requirement and delivery location for quotation and current availability review.
Eligible Pan-India requirements may be supported depending on product availability, required quantity, delivery destination and applicable order conditions. Businesses outside Delhi NCR should submit the exact model and destination when requesting commercial information.
Fill in your details and our B2B team will contact you shortly.
