The Cordless Impact Wrench is a 20V brushless fastening tool designed for high-torque tightening and loosening of compatible nuts and bolts in industrial, automotive, maintenance, fabrication, assembly, and service environments. The EMTOP ECIWL2055 delivers 550Nm fastening torque and 700Nm breakaway torque through a 1/2-inch square drive, with three no-load speed and impact-rate ranges. Its supplied kit includes three sockets, two 4.0Ah batteries, a charger, and carrying case. IndustrialAdda supplies the Cordless Impact Wrench for B2B requirements across Delhi NCR, with Pan-India supply capability for eligible orders subject to availability and order conditions.
The Cordless Impact Wrench ECIWL2055 is built around high-torque rotary impact action for compatible threaded fastening work. Unlike a drill-focused cordless tool, its primary role is tightening and loosening nuts and bolts through a 1/2-inch square drive. The 20V brushless configuration provides 550Nm fastening torque and 700Nm breakaway torque.
The model provides three operating speed ranges:
Its corresponding impact-rate ranges are:
For buyers, the distinction between fastening torque and breakaway torque is important. The stated 550Nm value represents the product's fastening torque specification, while the 700Nm figure is its stated breakaway torque.
The supplied 1/2-inch square drive accommodates compatible impact sockets. Three socket sizes—21mm, 22mm, and 24mm—are included with ECIWL2055.
The EMTOP ECIWL2055 Cordless Impact Wrench combines 550Nm fastening torque, 700Nm breakaway torque, three speed ranges, and three corresponding impact-rate ranges. These specifications are particularly relevant when procurement teams are evaluating a cordless wrench for repeated nut-and-bolt work rather than general drilling or screwdriving.
550Nm Fastening Torque
The ECIWL2055 has a stated fastening torque of 550Nm.
For industrial users, the required fastening torque depends on the fastener, joint, equipment specification, and actual application.
The wrench should therefore be selected against the torque requirements of the intended work rather than solely on the basis of its maximum rating.
700Nm Breakaway Torque
The stated breakaway torque is 700Nm.
Breakaway torque is particularly relevant when the tool is being evaluated for loosening compatible fasteners.
Maintenance departments and automotive workshops should consider this specification when identifying the wrench for removal-related tasks.
Where a fastener requires a specific final tightening torque, the relevant equipment or fastening procedure should still be followed.
Three No-Load Speed Ranges
The Cordless Impact Wrench provides three no-load speed ranges:
0–1500 / 0–2000 / 0–2500 rpm
Multiple operating ranges give users different speed options for compatible fastening and loosening tasks.
Three Impact-Rate Ranges
The impact mechanism operates across:
0–2600 / 0–3000 / 0–3500 bpm
These impact-rate specifications work alongside the tool's rotational operation to provide its impact-wrench functionality.
1/2-Inch Square Drive
The 1/2-inch square drive is a central compatibility specification of ECIWL2055.
Procurement teams should ensure that the sockets required for their applications are compatible with this drive size.
The supplied kit already contains three sockets in commonly specified sizes:
21mm, 22mm, and 24mm.
Brushless Motor
The ECIWL2055 uses a brushless motor and operates on a 20V battery platform.
This specification helps buyers distinguish the model from other cordless impact wrench configurations when preparing an RFQ or repeat purchase.
Integrated LED Work Light
An integrated LED work light illuminates the immediate fastening area.
This can be practical for maintenance and service personnel working around vehicle assemblies, equipment frames, machinery, workshop areas, or other locations where the fastener is not adequately illuminated by ambient lighting.
The Cordless Impact Wrench ECIWL2055 is supplied as a kit containing the impact wrench, three sockets, two 4.0Ah batteries, one charger, and a carrying case. The package configuration is relevant for buyers who require a ready-defined cordless wrench kit rather than procuring the main tool and primary accessories separately.
The supplied components include:
The charger input is specified as:
220–240V ~ 50/60Hz
The inclusion of two 4.0Ah battery packs should be considered when comparing the procurement package with other impact wrench configurations that may include a different battery quantity or capacity.
For repeat purchasing, buyers should specify the complete ECIWL2055 model reference to reduce the risk of ordering a different package configuration.
The Cordless Impact Wrench is relevant to operations involving repeated tightening or loosening of compatible nuts and bolts. Its 550Nm fastening torque, 700Nm breakaway torque, cordless operation, and 1/2-inch square drive make ECIWL2055 applicable to suitable automotive, equipment maintenance, fabrication, assembly, and contractor tasks.
Automotive Workshop Fastening
Automotive workshops frequently handle wheel-related and mechanical fasteners during servicing and repair.
The cordless format allows technicians to move around vehicles without maintaining a mains connection to the tool.
The supplied 21mm, 22mm, and 24mm sockets may correspond with suitable workshop fastening requirements.
However, technicians should always use the correct socket and follow the required fastening procedure for the specific vehicle or component.
Plant and Machinery Maintenance
Industrial maintenance personnel may need to remove nuts and bolts before guards, brackets, assemblies, or components can be accessed.
A stubborn fastener can increase maintenance time when the removal method is unsuitable for the requirement.
The 700Nm stated breakaway torque makes this an important specification for maintenance buyers evaluating ECIWL2055 for compatible loosening tasks.
For plant procurement, fastener size, access, socket compatibility, and required torque should be reviewed before tool selection.
Fabrication and Structural Assembly Support
Fabrication environments can involve repeated threaded fastening during equipment, frame, fixture, or component assembly.
The ECIWL2055 provides cordless operation with a 1/2-inch square drive and three speed ranges.
Where the application requires controlled final torque, the required tightening procedure should still be followed rather than treating the impact wrench's maximum torque specification as a substitute for a specified torque value.
Equipment Installation
Industrial equipment installation can require technicians to work at several fastening points around a machine, frame, support, or assembly.
Cordless operation reduces dependence on a nearby electrical outlet during tool use.
The two supplied 4.0Ah batteries also give project procurement teams a defined two-battery configuration when allocating tools to installation crews.
Contractor and Site Maintenance Work
Industrial contractors may move between different work zones during a project.
Transporting the wrench, charger, batteries, and sockets together in the supplied carrying case provides an organized kit format for mobile work.
Before project deployment, teams should confirm that the supplied and separately required socket sizes match the fasteners encountered on site.
MRO and Service Teams
MRO personnel often need tools that can be allocated consistently across technicians or maintenance locations.
Using ECIWL2055 as the procurement reference gives purchasing departments a specific configuration covering torque, drive size, batteries, charger, and included sockets.
This can also simplify repeat enquiries where multiple units are required.
The EMTOP ECIWL2055 Cordless Impact Wrench is a 20V brushless model with a 1/2-inch square drive, 550Nm fastening torque, and 700Nm breakaway torque. It provides three no-load speed ranges and three impact-rate ranges and is supplied with two 4.0Ah batteries, three sockets, a charger, and carrying case.
Technical Parameter |
Supplied Specification |
|
Product Name |
Cordless Impact Wrench |
|
Brand |
EMTOP |
|
Model |
ECIWL2055 |
|
Product Category |
Cordless Tools |
|
Product Type |
Impact Wrench |
|
Motor |
Brushless |
|
Voltage |
20V |
|
Square Drive |
1/2 inch |
|
No-Load Speed |
0–1500 / 0–2000 / 0–2500 rpm |
|
Impact Rate |
0–2600 / 0–3000 / 0–3500 bpm |
|
Fastening Torque |
550Nm |
|
Breakaway Torque |
700Nm |
|
Work Light |
Integrated LED |
|
Included Sockets |
21mm, 22mm, 24mm |
|
Battery |
2 × 4.0Ah EBPK20021 |
|
Charger |
1 × EFCR20411 |
|
Charger Input |
220–240V ~ 50/60Hz |
|
Packaging |
Carrying Case |
No weight, dimensions, stock level, charging time, or other performance values have been added because they were not provided in the product brief.
The Cordless Impact Wrench ECIWL2055 combines a 1/2-inch drive with 550Nm fastening torque and 700Nm breakaway torque in a cordless 20V configuration. For procurement teams, its practical relevance lies in matching these specifications with repetitive nut-and-bolt work where portability and higher torque capability are required.
Several supplied characteristics are particularly relevant:
High breakaway specification: The stated 700Nm breakaway torque is relevant to compatible fastener-removal requirements.
Defined fastening capability: A 550Nm fastening torque specification gives buyers a clear performance parameter for product evaluation.
Multiple operating ranges: Three speed and impact-rate ranges provide operating options rather than one fixed range.
1/2-inch drive format: Buyers can identify socket compatibility around a clearly specified square-drive size.
Two 4.0Ah batteries: The package includes two EBPK20021 battery packs.
Sockets included: Three sockets—21mm, 22mm, and 24mm—form part of the supplied kit.
Cordless mobility: The 20V battery platform supports operation without a continuous mains connection.
Selection should ultimately reflect the required fastener sizes, specified tightening requirements, socket compatibility, workload, and operating environment.
IndustrialAdda supplies the Cordless Impact Wrench ECIWL2055 for B2B procurement across its primary Delhi NCR market. Businesses can submit the exact model number, quantity, delivery destination, and relevant application information for product identification, quotation support, availability confirmation, and eligible Pan-India supply assessment.
For an accurate enquiry, use the reference:
EMTOP Cordless Impact Wrench – ECIWL2055
IndustrialAdda supports procurement requirements involving:
IndustrialAdda is the supplier for the procurement requirement and is not represented as the OEM, manufacturer, or product developer of the EMTOP Cordless Impact Wrench.
Delhi NCR is IndustrialAdda's primary service region for industrial product supply, including Cordless Impact Wrench enquiries. Eligible requirements may also be supported across other Indian locations depending on quantity, product availability, destination, and order conditions. Current stock and delivery schedules should be confirmed at the quotation stage.
Delhi NCR procurement may include businesses in:
The ECIWL2055 can be considered by automotive workshops, manufacturing plants, fabrication units, engineering companies, maintenance departments, industrial contractors, and MRO operations with suitable fastening requirements.
For larger project or bulk requirements outside Delhi NCR, buyers should provide the delivery location together with the required quantity.
IndustrialAdda has Pan-India supply capability for eligible orders, but this should not be interpreted as a guarantee of stock or a fixed dispatch timeline for every enquiry.
Businesses requesting the Cordless Impact Wrench ECIWL2055 should provide the model number, quantity, delivery location, and relevant fastening requirement. Exact model identification is especially useful when purchasing cordless tools because similar impact wrench models can differ in torque, square-drive size, battery capacity, supplied sockets, and package configuration.
For a procurement-ready request:
For broader industrial sourcing, purchasing teams can submit multiple product codes, required quantities, technical specifications, or a complete BOM.
The ECIWL2055 Cordless Impact Wrench is intended for suitable nut-and-bolt tightening and loosening tasks in automotive workshops, industrial maintenance, fabrication, equipment assembly, installation, contractor, and MRO environments. Buyers should verify the fastener, socket, torque requirement, and operating conditions before selecting the wrench for a specific application.
The EMTOP ECIWL2055 has a stated fastening torque of 550Nm and breakaway torque of 700Nm. These are separate specifications and should not be treated as interchangeable. Industrial users should compare the tool's ratings with the fastening or loosening requirements of their actual application before procurement.
The ECIWL2055 uses a 1/2-inch square drive. Three sockets—21mm, 22mm, and 24mm—are included with the supplied package. Procurement teams requiring other socket sizes should confirm that the intended impact-rated socket is compatible with the tool's specified drive and their application.
The supplied ECIWL2055 kit contains two 4.0Ah EBPK20021 battery packs and one EFCR20411 charger. The charger input is specified as 220–240V ~ 50/60Hz. The package also contains three sockets and is packed in a carrying case for organized transport and storage.
If your workshop, maintenance department, manufacturing facility, fabrication operation, installation team, contractor, or MRO function requires the Cordless Impact Wrench ECIWL2055, share the exact model number, quantity, delivery destination, and relevant fastening requirements with IndustrialAdda. Buyers handling larger procurement packages can also submit additional product codes, socket or tool requirements, technical specifications, bulk quantities, or a BOM for sourcing review. IndustrialAdda can assess the enquiry for product identification, quotation, current availability, and applicable delivery support across Delhi NCR or eligible Pan-India locations.
| Brushless motor | Voltage: 20V |
|---|---|
| Square drive | 1/2" |
| No-load speed | 0-1500/0-2000/0-2500rpm |
| Impact rate | 0-2600/0-3000/0-3500bpm |
| Fastening torque | 550Nm |
| Breakaway torque | 700Nm |
| Integrated LED work light | Integrated LED work light |
| Include | 3 Pcs sockets(21,22,24mm) |
| Battery pack | 2 Pcs 4.0Ah battery pack(EBPK20021) |
| Charger | 1 Pcs charger(EFCR20411) |
| Charge volts | 220-240V~50/60Hz |
| Packaging | Packed by carrying case |
IndustrialAdda supplies Cordless Impact Wrench ECIWL2055 requirements across Delhi NCR, including enquiries from businesses in Delhi, Noida, Gurgaon, Faridabad, and Ghaziabad. Buyers should provide the exact model number and quantity to request current quotation, availability information, and applicable delivery support.
IndustrialAdda supports eligible B2B and bulk procurement enquiries. Workshops, factories, maintenance departments, contractors, and project purchasing teams can submit ECIWL2055 with the required quantity and destination. Current availability and delivery feasibility should be confirmed for the specific requirement rather than assuming a fixed stock position.
Eligible ECIWL2055 orders may be supported across India through IndustrialAdda's Pan-India supply capability, subject to availability and order requirements. Businesses outside Delhi NCR should provide the model number, quantity, and destination so the sourcing requirement and delivery feasibility can be assessed.
Send Cordless Impact Wrench – ECIWL2055, the required number of units, delivery location, and any relevant fastening or project specifications to IndustrialAdda. For multi-product procurement, buyers may also submit additional model numbers, product codes, quantities, technical requirements, or a BOM for consolidated sourcing review.
Fill in your details and our B2B team will contact you shortly.
