EMTOP ETCR1006 Tile Cutter

Cutting System and Product Configuration

EMTOP ETCR1006 combines a 1000 mm cutting span with a 22 × 6 × 2 mm tungsten carbide ball-bearing blade and a guided sliding arrangement. A 1220 × 200 mm steel base, 10 mm sliding bar, aluminum sliders and die-cast aluminum handle define the supplied physical configuration of this manual Tile Cutter.
1000 mm Maximum Cutting Length
ETCR1006 accepts a maximum cutting length of:
1000 mm
For procurement teams, this is one of the first specifications to check against the tiles being used on a project.
A contractor working with longer tile formats should verify compatibility before placing an order rather than selecting the cutter based only on product category.
16 mm Tile Thickness Capacity
The specified maximum cutting thickness is:
16 mm
Both tile length and thickness should therefore be considered when determining whether ETCR1006 matches a particular ceramic or porcelain tile requirement.
Tungsten Carbide Cutting Blade
The model uses a tungsten carbide ball-bearing blade measuring:
22 × 6 × 2 mm
A tungsten carbide cutting blade is also included in the supplied package.
Using the exact blade specification in procurement documentation can help with model identification and future replacement requirements.
Straight Cuts for Standard Tile Sizing
Straight-line cutting supports common tile-fitting tasks where a full tile needs to be reduced along a linear cutting path.
Examples include fitting tiles against room boundaries, walls and other straight installation edges.
Diagonal Cutting Capability
Some flooring and decorative layouts require angled tile sections rather than only rectangular pieces.
The ETCR1006 supports diagonal-line cutting in addition to standard straight cuts.
1220 × 200 mm Steel Base
The Tile Cutter uses a steel base measuring:
1220 × 200 mm
This specification is useful for both model verification and planning the working space required to position the cutter during site use.
Extra-Long Aluminum Sliders
The supplied configuration incorporates extra-long aluminum sliders.
These operate with a 10 mm diameter sliding bar as part of the tool's guided cutting arrangement.
Die-Cast Aluminum Handle
The handle is manufactured from die-cast aluminum.
This is a supplied construction specification rather than an inferred performance or durability claim.
13.2 kg Net Weight
ETCR1006 has a stated net weight of:
13.2 kg
Weight is relevant to contractors who need to move the Tile Cutter between work areas, floors or project sites.

Where the ETCR1006 Tile Cutter Can Be Used?

The Tile Cutter is intended for professional tile-fitting environments including flooring, bathrooms, kitchens, wall cladding, renovation and interior construction. Its 1000 mm cutting length and 16 mm thickness capacity allow installers to process suitable ceramic, porcelain and compatible tiles, while straight and diagonal modes address different layout requirements.
Flooring Projects with Larger Tiles
Flooring teams often encounter tiles that need trimming at walls, columns, room boundaries and transitions.
The challenge becomes greater as tile formats increase in size because the cutting tool must physically accommodate the tile.
With a maximum cutting length of 1000 mm, ETCR1006 can be considered for suitable larger floor tiles.
Before bulk procurement, project teams should confirm the actual tile schedule against both the cutter's length and thickness limits.
Bathroom Installation Work
Bathroom tiling involves multiple boundaries, corners and changes in installation dimensions.
Tile installers may need straight sections for wall and floor edges as well as diagonal pieces for particular layouts.
ETCR1006 provides both cutting modes within one manual tool.
Where several tilers are working simultaneously, the project purchaser should consider tool quantity against the number of installation teams and project schedule.
Kitchen Tiling
Kitchen projects may involve wall tiles, floor tiles or tiled surfaces around fixed cabinetry and architectural boundaries.
Accurate tile sizing is required when standard full-size pieces do not match the available installation space.
The ETCR1006 can support compatible ceramic and porcelain tile cutting where the material falls within its 1000 mm × 16 mm stated capacity parameters.
Interior Wall Cladding
Wall cladding can involve repetitive tile cutting around ends, corners and other fixed building dimensions.
For suitable tiles, the cutter's straight-line function handles conventional resizing while diagonal cutting can address angled layout requirements.
The carrying/storage bag may also be relevant to interior contractors moving equipment between project locations.
Renovation and Refurbishment
Renovation projects differ from new construction because tile installation must often adapt to existing walls, openings and room dimensions.
This can increase the number of tiles that require individual sizing.
A manual Tile Cutter gives renovation teams a dedicated tool for suitable ceramic and porcelain tile work without implying any electrical cutting capability not specified for this model.
Commercial Fit-Out Projects
Retail, office, hospitality and other commercial fit-out projects can involve substantial quantities of floor and wall tiles.
For purchasing departments, repeatable model identification can be as important as the initial tool selection.
Specifying EMTOP ETCR1006 on RFQs, purchase records and repeat orders helps distinguish this model from Tile Cutters with different cutting capacities.

Technical Specifications of Tile Cutter ETCR1006

The ETCR1006 is a Manual Multi-Function Tile Cutter rated for cuts up to 1000 mm long and tiles up to 16 mm thick. Its supplied hardware includes a tungsten carbide ball-bearing blade, die-cast aluminum handle, steel base, 10 mm sliding bar and extra-long aluminum sliders, with a net weight of 13.2 kg.

No motor power, voltage, cutting speed, electrical supply, dust collection specification, warranty term or certification information has been supplied.
Such details should not be added to this product page without verified information.

Why ETCR1006 Can Suit Professional Tiling Requirements?

The ETCR1006 offers a practical manual cutting configuration for suitable professional tile installations. Buyers get a defined 1000 mm length capacity, 16 mm thickness limit, straight and diagonal cutting options and model-specific blade and structural specifications, allowing procurement teams to assess compatibility before committing to project or repeat purchases.
A key procurement advantage is that the model has clearly specified working limits.
Buyers can compare the 1000 mm cutting length and 16 mm thickness capacity directly with the tiles listed for a project.
Straight and diagonal cutting within one machine also means the cutter is not restricted to a single cutting orientation.
The supplied carrying/storage bag addresses another practical consideration: movement and storage of the tool between active projects.
At 13.2 kg, its weight is also documented in advance for buyers evaluating handling requirements.
Most importantly, model-based sourcing helps purchasing teams avoid confusion between visually similar Tile Cutters that may have different capacities.

Sourcing Tile Cutter ETCR1006 Through IndustrialAdda

IndustrialAdda supplies the EMTOP ETCR1006 Tile Cutter for B2B construction, renovation, flooring and interior-project requirements. Procurement teams can request model verification, quotation assistance and quantity-based sourcing by submitting the exact product code and project details. IndustrialAdda acts as the supplier rather than the manufacturer or product designer.
IndustrialAdda can assist businesses with:

• Exact ETCR1006 identification
• Quantity-based quotation requests
• Contractor tool procurement
• Construction project sourcing
• Multi-product requirements
• BOM and tool-list enquiries
• Availability confirmation
• Delhi NCR supply requirements
• Eligible Pan-India project orders

For purchasing departments managing several categories of industrial products, the Tile Cutter can be included in a consolidated procurement request alongside other construction tools.
No authorization status beyond the stated supplier role should be inferred.

Tile Cutter Supply Across Delhi NCR and Eligible Indian Locations

IndustrialAdda's primary supply area for the ETCR1006 Tile Cutter is Delhi NCR. Businesses in Delhi, Noida, Ghaziabad, Gurgaon and Faridabad can submit procurement enquiries, while eligible requirements in other Indian locations may also be supported according to order quantity, destination, product availability and commercial conditions.
For buyers searching for a Tile Cutter supplier in Delhi NCR, the most useful information to provide is the exact model and required quantity.
IndustrialAdda is located in New Delhi and primarily supports business procurement across the wider NCR region.
For orders outside Delhi NCR, Pan-India supply capability applies to eligible requirements rather than representing guaranteed nationwide stock or delivery.
Actual fulfillment depends on factors including:

• Availability at the time of enquiry
• Required quantity
• Delivery destination
• Project requirements
• Commercial and logistical conditions

A fixed delivery timeline has not been supplied for ETCR1006.
Buyers working against a project deadline should therefore request current availability and delivery information during quotation.

How to Submit an ETCR1006 Tile Cutter Enquiry?

To enquire about the ETCR1006 Tile Cutter, provide IndustrialAdda with the exact model number, required quantity, tile type or application where relevant, and delivery destination. Buyers with project-specific requirements can also submit tile dimensions, technical schedules or consolidated tool lists before requesting quotation, availability and delivery confirmation.
For a procurement-ready enquiry, share:

1. Product and model: Tile Cutter – EMTOP ETCR1006
2. Quantity: Number of units required
3. Application: Flooring, wall cladding, bathroom, kitchen, renovation or other tiling work
4. Tile details: Type, dimensions and thickness where relevant
5. Delivery destination: City and PIN code
6. Project information: Required date or project schedule where applicable
7. Additional sourcing: Other construction tools or BOM items, if required

Mentioning ETCR1006 is particularly important when requesting repeat procurement because EMTOP Tile Cutters may have different cutting-length configurations.
Procurement CTA: Send your ETCR1006 model requirement, quantity and delivery location to request a quotation and current availability confirmation.

Frequently Asked Questions

1. Which tile sizes can the ETCR1006 Tile Cutter accommodate?

The ETCR1006 is specified for a maximum cutting length of 1000 mm and maximum cutting thickness of 16 mm. Buyers should compare both measurements with the actual ceramic, porcelain or compatible tiles planned for the project. Tile compatibility should not be determined from length alone when thickness is also a stated operating limit.

2. Does ETCR1006 support both straight and angled tile cutting?

Yes. The supplied cutting functions are straight-line cutting and diagonal-line cutting. This allows the same manual Tile Cutter to address standard linear resizing and suitable angled cuts required by particular floor or wall layouts. No other cutting modes have been provided in the product specification.

3. What cutting blade comes with the ETCR1006?

ETCR1006 uses a 22 × 6 × 2 mm tungsten carbide ball-bearing blade. One tungsten carbide cutting blade is included in the supplied package along with the Tile Cutter and carrying/storage bag. Buyers sourcing replacement components should use the documented blade specification and model information when requesting compatibility confirmation.

4. What types of projects can use the ETCR1006 Tile Cutter?

The supplied applications include flooring, wall tiling, bathroom installations, kitchen tiling, wall cladding, interior finishing, construction and renovation work. The cutter is intended for suitable ceramic, porcelain and compatible tiles that remain within its 1000 mm cutting-length and 16 mm cutting-thickness limits.

Procurement Requirement for EMTOP ETCR1006

Businesses planning to procure the ETCR1006 Tile Cutter can submit the model number together with quantity, project application, tile specifications and delivery PIN code.
For construction or fit-out projects involving several products, include your BOM, tool schedule or consolidated requirement so the Tile Cutter can be evaluated as part of the wider procurement request.
IndustrialAdda can assist with model verification, quotation coordination and eligible supply requirements across Delhi NCR and other Indian locations, subject to availability and order conditions. Send your product requirement for commercial confirmation.