Cut-Resistant Gloves are protective work gloves designed for tasks involving sharp, rough or abrasive materials where additional hand protection is required. EMTOP model EXGV0301XL is an XL-size, Level C glove built around a 13-gauge HPPE shell with an embossed latex-coated palm. The supplied protection level is 4X43C, and the design is intended to provide both cut and abrasion resistance. The gloves are relevant to glass handling, timber work, fabrication support, warehouse material handling and industrial maintenance. IndustrialAdda supplies the EMTOP EXGV0301XL across Delhi NCR, with eligible Pan-India procurement support subject to availability and order requirements.
EMTOP EXGV0301XL Cut-Resistant Gloves are XL work gloves made with a 13-gauge HPPE shell and embossed latex coating. They provide Level C cut resistance and are specified with a 4X43C protection level, making them relevant for suitable material-handling tasks involving sharp, rough or abrasive objects.
The product belongs to the Personal Protective Equipment (PPE) / Hand Protection category.
Unlike general-purpose mechanic or leather gloves, this model is specifically identified for cut resistance and abrasion resistance.
The liner is made from HPPE shell material, while the palm uses an embossed latex coating.
The glove is constructed at 13 gauge, and the supplied cut-resistance classification is Level C.
The protection level is specified as 4X43C.
Its design is described as a pressed construction for extended service life.
These technical characteristics give procurement teams a clearly defined glove configuration for suitable higher-risk material-handling applications.
Typical buyers may include:
Buyers should use the exact reference EXGV0301XL when requesting quotation or repeat supply.
The EXGV0301XL combines a Level C cut-resistance classification with a 13-gauge HPPE shell, embossed latex palm and 4X43C protection level. These supplied specifications give industrial buyers a defined technical basis for selecting the gloves where both cut and abrasion resistance are relevant to the task.
Level C Cut Resistance
The supplied cut-resistance level is Level C.
This is one of the primary technical specifications of the product and should be included in purchase requirements where buyers need a defined cut-protection level.
The glove should still be matched to the actual hazard assessment and applicable workplace PPE standard.
13-Gauge HPPE Shell
The liner is a 13-gauge HPPE shell.
Gauge describes the construction density of the knitted liner, while HPPE is the stated shell material.
These details are useful for model verification and technical procurement.
Embossed Latex Coating
The coating finish is specified as embossed latex.
The palm is latex-coated, making the coating one of the main working-surface characteristics of the glove.
No unsupported grip coefficient or chemical-resistance claim should be inferred from the latex coating alone.
Latex-Coated Palm
The palm area is specifically coated with latex.
For tasks involving frequent material contact, palm construction is particularly relevant because this is where much of the handling interaction occurs.
4X43C Protection Level
The supplied protection level is 4X43C.
This provides a defined technical reference that buyers can record in PPE documentation or use when matching a required glove specification.
Cut and Abrasion Resistance
The stated protection properties include:
This makes the glove relevant to work where handled materials may have sharp edges or abrasive surfaces.
Pressed Construction
The product uses a pressed construction for extended service life.
This is the supplied design characteristic and should not be expanded into unsupported lifespan or durability claims.
Cut-Resistant Gloves EXGV0301XL can be used in suitable environments involving sharp-edged, rough or abrasive materials. Typical applications include timber handling, glass handling, fabrication support, warehouse operations, heavy sharp-object carrying and industrial maintenance where the stated Level C cut resistance matches the workplace requirement.
Glass Handling
Glass sheets, panels and components can present sharp edge hazards during movement and positioning.
The Level C cut-resistance specification and HPPE shell make the EXGV0301XL relevant to suitable glass-handling operations.
The latex-coated palm also forms the main contact surface during manual handling.
Procurement teams should still verify whether the supplied protection classification is appropriate for the exact type and thickness of glass being handled.
Timber and Wood Handling
Timber, rough boards and wooden components can expose workers to sharp edges, splinters and abrasive surfaces.
The combination of cut and abrasion resistance makes this glove relevant to appropriate timber-handling tasks.
Businesses purchasing for wood-processing or construction support should specify required size and quantity.
Fabrication Support Work
Fabrication environments frequently involve metal sections, sheet material and components with exposed edges.
Cut-Resistant Gloves can be considered for suitable support tasks involving movement, positioning or handling of such materials.
For welding, thermal or specialized fabrication hazards, a different glove specification may be required.
Sheet and Material Handling
Workers handling sheets, panels, edged components or similar materials may need protection against contact with sharp surfaces.
The EXGV0301XL provides a model-specific cut-resistant glove option in these environments.
Its XL sizing should be checked for user fit before ordering for an entire workforce.
Warehouse Operations
Warehouses may store and move a variety of packaged and unpackaged materials.
Where workers handle items with rough or sharp surfaces, a cut-resistant glove may form part of the PPE arrangement.
For repeat procurement, the 4X43C and Level C references can be retained in purchasing documentation.
Industrial Maintenance
Maintenance teams may encounter sheet metal, worn components, sharp-edged parts or rough materials during repair work.
EXGV0301XL can be considered where the supplied protection characteristics align with the actual task.
EMTOP EXGV0301XL Cut-Resistant Gloves are XL-size Level C work gloves built with a 13-gauge HPPE shell and embossed latex-coated palm. The protection level is 4X43C, and the gloves are designed to provide cut and abrasion resistance in suitable industrial applications.
Specification |
Product Detail |
|
Product Name |
Cut-Resistant Gloves |
|
Brand |
EMTOP |
|
Model Number |
EXGV0301XL |
|
Product Type |
Level C Cut-Resistant Work Gloves |
|
Product Category |
PPE / Hand Protection |
|
Size |
XL |
|
Liner Material |
HPPE Shell |
|
Cut-Resistance Level |
Level C |
|
Gauge |
13 Gauge |
|
Coating Material / Finish |
Embossed Latex |
|
Palm |
Latex-Coated Palm |
|
Protection Level |
4X43C |
|
Design |
Pressed Construction for Extended Service Life |
|
Protection Properties |
Cut Resistance and Abrasion Resistance |
|
Quantity |
1 Pair |
|
Packaging |
Paper Card |
|
Package Contents |
1 Pair × Cut-Resistant Gloves |
No heat-protection, chemical-resistance, electrical-protection or waterproof classification has been supplied.
Those properties should therefore not be assumed.
EXGV0301XL is specifically configured for suitable tasks where cut and abrasion resistance matter. The combination of Level C cut resistance, 13-gauge HPPE shell, latex-coated palm and 4X43C protection level gives industrial buyers a clear technical specification for evaluating the glove against workplace requirements.
Defined Cut-Resistance Classification
Level C provides a clear protection reference rather than relying on a vague “cut-resistant” description.
HPPE Shell Construction
The HPPE liner is one of the main structural characteristics of the glove and supports the intended protective application.
Abrasion Resistance Included
The product specification explicitly includes abrasion resistance as a protection property.
This is relevant where materials are not only sharp but also rough.
Latex Palm Surface
The embossed latex coating forms the working surface of the glove palm and helps define the handling configuration.
Model-Specific Protection Reference
The 4X43C rating provides procurement teams with a concrete identifier for product verification and repeat purchasing.
IndustrialAdda supplies EMTOP EXGV0301XL Cut-Resistant Gloves for industrial, contractor, warehouse and maintenance procurement requirements. Buyers can use IndustrialAdda for model verification, quotation assistance, quantity-based sourcing and availability confirmation while EMTOP remains the product brand and IndustrialAdda acts as the supplier.
IndustrialAdda can support requirements involving:
IndustrialAdda does not claim to be the manufacturer, OEM or product designer of the EXGV0301XL.
For larger requirements, procurement teams can submit multiple PPE model numbers, quantities and delivery details in one RFQ.
IndustrialAdda primarily supports B2B customers across Delhi NCR from New Delhi. Eligible requirements for EXGV0301XL Cut-Resistant Gloves may also be supplied to other Indian locations depending on product availability, order quantity, destination and commercial conditions.
Delhi NCR Supply
IndustrialAdda supports business enquiries across:
Typical buyers may include fabrication units, warehouses, manufacturing plants, engineering companies and maintenance contractors.
Businesses searching for a Cut-Resistant Gloves supplier in Delhi NCR should provide model EXGV0301XL and the required number of pairs.
Pan-India Requirements
Eligible bulk and commercial requirements can also be assessed for delivery outside Delhi NCR.
Supply depends on:
Delivery timelines should be confirmed during the quotation process.
To request a quotation for EMTOP EXGV0301XL Cut-Resistant Gloves, provide IndustrialAdda with the exact model number, required quantity, application and delivery location. Where the purchase is tied to a workplace PPE standard, include that technical requirement as part of the enquiry.
A structured enquiry can include:
1. Product reference
Mention Cut-Resistant Gloves – EMTOP EXGV0301XL.
2. Quantity
State the number of pairs required.
3. Work application
Mention glass handling, timber handling, fabrication, warehouse work or another relevant task.
4. PPE specification
Include required protection levels or project documentation if applicable.
5. Delivery location
Provide city and PIN code.
6. Request commercial details
Ask for availability, quotation and delivery confirmation.
For multi-product requirements, buyers can send a PPE schedule, BOM or product-code list.
The EXGV0301XL is intended for suitable work involving sharp, rough or abrasive materials. Typical applications include glass handling, timber handling, fabrication support, sheet and material handling, warehouse operations and industrial maintenance where Level C cut resistance is appropriate for the task.
The supplied cut-resistance level is Level C. The product also has a stated protection level of 4X43C and is designed to provide both cut and abrasion resistance. Buyers should verify that this classification matches their workplace hazard assessment before procurement.
The liner is made from HPPE shell material and is constructed at 13 gauge. The palm is coated with embossed latex. These specifications help define the exact EXGV0301XL configuration for procurement and repeat ordering.
Glass handling is one of the supplied applications for EXGV0301XL. The glove may be considered for appropriate glass-handling tasks where its Level C cut resistance and 4X43C protection level match the workplace requirement. Buyers should still assess the specific glass-handling hazard before use.
For B2B procurement of EMTOP Cut-Resistant Gloves EXGV0301XL, provide IndustrialAdda with:
IndustrialAdda can assist with model verification, quotation coordination and eligible supply requirements across Delhi NCR and other Indian locations, subject to availability and order conditions. Send your product requirement for commercial confirmation.
| HAND PROTECTION | Use for timber and glass cutting worker, heavy sharp objects carriers etc. |
|---|---|
| Size | XL |
| Liner Material | HPPE shell,Level C cut-resistant glove core |
| Coating material/Finish | embossed latex |
| Gauge | 13 |
| Protection level | 4X43C |
| From pressing,longer life time than normal. | Latex coated palm |
| HPPE shell,cut-resistance and abrasion. | 1pair/paper |
| Packed by | paper card |
IndustrialAdda supplies EmTop EXGV0301XL Cut-Resistant Gloves for B2B procurement across Delhi NCR, including Delhi, Noida, Gurgaon, Ghaziabad and Faridabad. Buyers can submit the exact model number, quantity and delivery location for quotation and availability confirmation.
Businesses, warehouses, contractors and industrial maintenance teams can submit quantity-based requirements for EXGV0301XL. The required number of pairs, delivery location and intended application should be included in the enquiry. Availability and commercial terms are confirmed for the actual order.
Yes. The supplied protection properties specifically include cut resistance and abrasion resistance. The glove uses an HPPE shell and embossed latex-coated palm, with a stated protection level of 4X43C. No additional unsupported resistance properties should be assumed.
Eligible Pan-India requirements may be supported depending on product availability, quantity, destination and order conditions. Buyers outside Delhi NCR should provide model EXGV0301XL, required quantity and exact delivery location so the procurement requirement can be evaluated.
Fill in your details and our B2B team will contact you shortly.
