The Welding Ground Clamp EMEH9A05 is a 500A welding accessory used to establish a return connection between a compatible welding circuit and the workpiece. Built with copper jaws and a chromed steel handle, it provides a maximum jaw opening of 75mm for gripping suitable conductive sections and connection points. The EMTOP EMEH9A05 measures 205mm in length and has a stated weight of 250g. IndustrialAdda supplies the Welding Ground Clamp for B2B requirements across Delhi NCR and can review eligible Pan-India orders according to quantity, product availability and delivery requirements.
The EMEH9A05 Welding Ground Clamp is a 500A-rated welding-circuit accessory designed to grip a suitable conductive workpiece or connection point during compatible arc-welding operations. Its copper jaws and 75mm maximum opening make it relevant to fabrication shops, structural welding teams, construction contractors and maintenance departments requiring a defined ground-clamp specification.
A Welding Ground Clamp forms part of the electrical return path during welding.
It is therefore different from a general-purpose mechanical clamp. Selection should consider both the electrical rating and the dimensions of the point where the clamp needs to be attached.
For the EMEH9A05, the primary procurement references are:
These specifications give purchasing teams clear identifiers when sourcing the clamp for new welding setups or replacement requirements.
The EMEH9A05 is specified around a 500A current rating and a 75mm maximum jaw opening. Copper jaws provide the stated contact construction, while the chromed steel handle forms the main body of the clamp. Its 205mm length and 250g weight provide additional physical references for model verification and procurement.
500A Rated Current
The supplied electrical rating is:
500A
This is the principal current specification associated with the EMEH9A05.
Industrial buyers should verify that the selected ground clamp is appropriate for the intended welding circuit and equipment configuration.
No duty-cycle rating has been supplied for this model.
75mm Maximum Jaw Opening
The maximum opening of the jaws is:
75mm
This dimension is important where the clamp needs to attach to larger conductive workpieces, sections, plates or suitable connection points.
Rather than purchasing only by amperage, buyers should check whether the physical clamping location falls within this stated opening.
Copper Jaw Construction
The EMEH9A05 uses:
Copper jaws
Because the jaws form the contact area with the conductive surface, jaw material is a useful technical reference when specifying a welding ground clamp.
No additional copper grade or contact-resistance information is provided.
Chromed Steel Handle
The product specification identifies a:
Chromed steel handle
This construction detail helps distinguish the model when comparing or replacing welding accessories.
No separate insulation specification has been provided for the handle.
205mm Overall Length
The clamp has a stated length of:
205mm
This gives buyers another measurable identifier for the EMEH9A05.
250g Weight
The specified product weight is:
250g
This value applies to the supplied clamp specification. No shipping or packaged weight has been provided.
The EMEH9A05 is intended for compatible welding-circuit grounding across fabrication, structural work, construction, repair and maintenance environments. Its 500A rating and 75mm jaw opening are particularly relevant when procurement teams need a clearly specified clamp for welding stations, field equipment or replacement accessory inventories.
Heavy Fabrication Work
Fabrication facilities may operate multiple welding stations for steel frames, assemblies and fabricated components.
Ground clamps can become part of routine replacement and maintenance inventory.
For these environments, the EMEH9A05 gives procurement teams two straightforward checks: 500A current rating and 75mm jaw opening.
Both should be reviewed against the actual welding setup.
Structural Welding
Structural fabrication often involves larger steel members and connection points.
The 75mm maximum jaw opening provides a physical reference when evaluating whether the clamp can be attached to the intended conductive location.
The actual welding-circuit requirement should also remain within the applicable product specification.
Construction-Site Welding
Site welding may involve temporary work areas and changing connection points as fabrication or erection progresses.
The EMEH9A05 can be considered for compatible site welding requirements where its physical and electrical specifications match the equipment being used.
For project procurement, required quantities may depend on the number of welding stations deployed.
Steel Fabrication
Steel fabricators performing routine welding on plates, frames, supports and fabricated sections require appropriate return-circuit accessories.
A defined model such as EMEH9A05 helps purchasing teams maintain consistency when replacement clamps are needed.
Recording the exact model number can also reduce ambiguity between clamps with different ratings.
Repair Welding
Industrial repair work may require welding on equipment frames, supports or replacement steel components.
Maintenance teams can evaluate the EMEH9A05 where a 500A-rated clamp and up to 75mm jaw opening match the repair setup.
Workshop Welding Stations
Engineering workshops may operate several welding machines across separate work bays.
For repeat procurement, specifying the exact ground-clamp model can help avoid mixing accessories with different physical or current ratings.
A useful internal purchasing reference is:
EMTOP EMEH9A05 — 500A — 75mm Jaw Opening
Maintenance and MRO
MRO departments may procure welding accessories alongside electrodes, holders, tools and other workshop requirements.
The EMEH9A05 can be specified by model, current rating and jaw opening when replacement ground clamps are included within a broader procurement list or BOM.
The EMTOP EMEH9A05 Welding Ground Clamp carries a stated 500A current rating and uses copper jaws with a chromed steel handle. It provides a maximum jaw opening of 75mm, measures 205mm in overall length, weighs 250g and is supplied in carton-box packaging.
Technical Parameter |
EMEH9A05 Specification |
|
Product |
Welding Ground Clamp |
|
Brand |
EMTOP |
|
Model |
EMEH9A05 |
|
Product Category |
Power Source |
|
Product Type |
Welding Ground Clamp |
|
Rated Current |
500A |
|
Jaw Construction |
Copper |
|
Handle Construction |
Chromed Steel |
|
Maximum Jaw Opening |
75mm |
|
Overall Length |
205mm |
|
Weight |
250g |
|
Packaging |
Carton Box |
The supplied product information does not specify cable size, cable connection type, insulation rating, duty cycle, copper grade, contact resistance or individual welding-machine compatibility.
These specifications should not be assumed.
The EMEH9A05 should be evaluated against both the electrical requirement of the welding circuit and the physical dimensions of the intended connection point. Its 500A rating defines the supplied current specification, while the 75mm maximum jaw opening provides the dimensional reference for clamping compatibility.
Procurement errors can occur when a Welding Ground Clamp is selected only by appearance.
For example, two clamps may serve the same general function while having different current ratings or jaw-opening capacities.
For EMEH9A05 purchasing, record:
Model: EMEH9A05
Current: 500A
Maximum opening: 75mm
This information is more precise than submitting a generic requirement for a “welding earth clamp.”
If the clamp is intended as a replacement for an existing setup, buyers should verify the required electrical and connection specifications before finalizing the order.
The EMEH9A05 provides industrial buyers with a clearly defined 500A Welding Ground Clamp specification rather than an unspecified general welding accessory. Its copper jaws, 75mm maximum opening and documented physical dimensions make the model straightforward to identify for workshop deployment, replacement purchasing and quantity-based procurement.
The supplied specifications provide several useful procurement references:
For businesses maintaining several welding stations, model-based purchasing can also help standardize procurement records.
No unsupported claims regarding service life, conductivity performance or welding productivity are required to establish the product's commercial relevance.
IndustrialAdda supports B2B sourcing of the EMTOP EMEH9A05 Welding Ground Clamp through model verification, quotation assistance, quantity-based procurement and industrial sourcing support. The company operates as a supplier and does not claim to manufacture or design the EMTOP Welding Ground Clamp.
Buyers can submit an enquiry using the exact product reference:
Product: Welding Ground Clamp
Brand: EMTOP
Model: EMEH9A05
Rated Current: 500A
Maximum Jaw Opening: 75mm
This level of detail is especially useful when a procurement request includes several welding accessories with different capacities.
IndustrialAdda can also review broader industrial sourcing requirements where multiple product codes or workshop items need to be quoted together.
Company details are available on the IndustrialAdda About Us page.
IndustrialAdda's primary supply region is Delhi NCR, supporting B2B product requirements from industrial buyers in Delhi, Noida, Gurugram, Faridabad, Ghaziabad and surrounding commercial areas. Eligible project, repeat and quantity-based requirements from other Indian locations may also be reviewed depending on product availability and order conditions.
The EMEH9A05 may be relevant to procurement teams working in:
Delhi NCR remains the primary service region.
Pan-India supply capability applies to eligible requirements and should not be interpreted as guaranteed stock or immediate dispatch to every location.
No fixed MOQ, current stock quantity or delivery lead time has been supplied for EMEH9A05.
Businesses enquiring for the EMEH9A05 should provide the exact Welding Ground Clamp model, required quantity and delivery destination. For replacement or project procurement, sharing the intended current requirement and clamping requirement can help make the enquiry more precise before quotation, availability and delivery conditions are confirmed.
A procurement request can be structured as:
If several welding accessories or industrial tools are required, buyers can submit the model numbers, quantities, technical specifications or complete BOM together.
Procurement enquiries can be submitted through the IndustrialAdda Contact Us page.
The EMTOP EMEH9A05 is used as a ground or return clamp in compatible welding circuits. It can be considered for arc welding, fabrication, structural welding, repair work, construction-site welding and workshop operations where its 500A current rating and physical clamping dimensions match the intended welding setup.
The EMEH9A05 Welding Ground Clamp has a stated rated current of 500A. Buyers should evaluate this specification against their intended welding circuit before procurement. The supplied product information does not state a duty-cycle rating or list specific compatible welding machines, so those details should not be assumed.
The EMEH9A05 has a stated maximum jaw opening of 75mm. This dimension helps procurement teams assess whether the clamp can physically attach to the intended conductive workpiece or connection point. The actual connection requirement should be checked before ordering, particularly when replacing an existing welding clamp.
Use the complete reference EMTOP EMEH9A05 Welding Ground Clamp, 500A, 75mm maximum jaw opening. The product also has copper jaws, a chromed steel handle, a 205mm stated length and a 250g stated weight. Providing the model number is the clearest way to distinguish it during repeat procurement.
If your fabrication facility, welding workshop, construction project or maintenance team requires a 500A Welding Ground Clamp with copper jaws and a 75mm maximum jaw opening, send IndustrialAdda the exact EMTOP EMEH9A05 model reference, quantity and delivery location. For project purchasing or repeat MRO procurement, you can also submit related welding-accessory codes, technical specifications or a complete BOM for coordinated quotation and availability review across Delhi NCR and eligible Pan-India destinations.
| Rated current | 500 A |
|---|---|
| Copper jaws and chromed steel handle | Copper jaws and chromed steel handle |
| Maximum jaw opening | 75 mm |
| Length | 205 mm |
| Weigh | 250 g |
| Packaging | Packed by carton box |
IndustrialAdda supports B2B procurement enquiries for the Emtop EMEH9A05 Welding Ground Clamp across Delhi NCR. Requirements from Delhi, Noida, Gurugram, Faridabad and Ghaziabad can be submitted with the model number, required quantity and delivery destination for availability and quotation review.
IndustrialAdda can review quantity-based requirements from fabrication workshops, manufacturing facilities, construction contractors, maintenance teams and other industrial buyers. Businesses requiring multiple EMEH9A05 clamps should provide the required quantity and destination so current availability and applicable commercial conditions can be assessed.
Eligible Pan-India requirements can be reviewed depending on current product availability, required quantity, delivery destination and applicable order conditions. IndustrialAdda primary supply focus is Delhi NCR, so buyers in other regions should submit their EMEH9A05 requirement for availability and delivery review.
Submit the product name Welding Ground Clamp, brand Emtop, model EMEH9A05, required quantity and delivery destination to IndustrialAdda. For larger procurement requirements, buyers can also include additional welding-accessory model numbers, technical specifications, quantities or a complete BOM so multiple items can be reviewed together.
Fill in your details and our B2B team will contact you shortly.
