The Angle Grinder is a 900W corded power tool intended for metal cutting, grinding, weld cleaning, surface finishing, rust removal, deburring, polishing, masonry cutting, fabrication, construction-site work, and maintenance applications. The EMTOP EAGR09051 operates on 220–240V at 50/60Hz, runs at a stated no-load speed of 12,000 rpm, and uses a 125mm disc with an M14 spindle thread. One auxiliary handle is supplied, while the cutting or grinding disc must be sourced separately. IndustrialAdda supplies the Angle Grinder across Delhi NCR, with eligible Pan-India supply subject to product availability and order requirements.
The Angle Grinder EAGR09051 is a mains-powered handheld grinder designed for suitable cutting, grinding, finishing, and material-preparation tasks. Its 125mm disc size, 900W input power, 12,000 rpm operating speed, and M14 spindle make it relevant to fabrication shops, workshops, contractors, maintenance teams, and construction operations.
The tool operates from:
220–240V ~ 50/60Hz
Its core technical configuration includes:
The exact procurement reference is:
EMTOP EAGR09051
This model number is important because angle grinders with similar power ratings may differ in disc size, spindle thread, or accessory configuration.
The EMTOP EAGR09051 Angle Grinder combines a 900W mains-powered motor configuration with a 125mm disc platform and 12,000 rpm no-load speed. These parameters help industrial buyers determine whether the grinder fits their cutting, grinding, finishing, and fabrication requirements.
The EAGR09051 uses a:
125mm disc
This is one of the most important product-selection specifications.
A 125mm disc format provides a defined accessory size for buyers sourcing suitable:
The selected accessory should match both the tool dimensions and the intended application.
The grinder operates at:
12,000 rpm no-load speed
This specification is especially relevant when selecting compatible grinding and cutting accessories.
An accessory should not be chosen on disc diameter alone. Its operating suitability should also be checked against the grinder’s stated speed and intended task.
The EAGR09051 has a stated:
900W input power
This gives procurement teams a defined technical parameter for comparing the product against other grinders within the same class.
The input-power figure should be assessed alongside disc size, spindle type, material, and expected work cycle.
The supplied spindle specification is:
M14
This differs from smaller grinder configurations that may use another spindle thread.
For procurement teams, the M14 spindle is a critical compatibility parameter when selecting related grinder accessories.
The package includes:
1 × auxiliary handle
The auxiliary handle supports two-handed use during suitable cutting or grinding operations.
No anti-vibration or multi-position handle claim has been added because such information is not included in the supplied specifications.
Disc Supplied Separately
The product brief clearly states:
Disc not included
This should be accounted for during procurement.
If the grinder is being ordered for immediate deployment, buyers should include the required compatible cutting, grinding, polishing, or finishing disc in the same purchase requirement.
The Angle Grinder EAGR09051 is relevant to fabrication, construction, maintenance, metalworking, workshop, and repair operations where a 125mm corded grinder is suitable. Its 900W power input, 12,000 rpm speed, and M14 spindle configuration provide a defined platform for several types of abrasive-tool applications.
Fabrication shops frequently need to cut suitable metal sections, pipes, brackets, rods, or sheet components before fitting or welding.
The EAGR09051 can support suitable metal cutting when fitted with a compatible 125mm cutting disc.
For procurement planning, buyers should consider:
Because the disc is not included, accessory procurement should form part of the overall tool requirement.
After cutting or welding, fabricated components may need edge correction or material removal.
A suitable grinding disc can be used with the EAGR09051 for appropriate grinding work.
The 125mm disc format provides buyers with a clearly defined accessory reference when ordering replacement consumables for workshop operations.
Welded components often require cleanup before inspection, painting, coating, or assembly.
The Angle Grinder can support suitable weld-cleaning tasks where material needs to be removed or smoothed around the weld area.
The actual grinding accessory should be selected according to the weld, workpiece, and required finish.
Industrial maintenance frequently involves preparation of metal surfaces affected by rust, oxidation, coatings, or surface contamination.
With the correct compatible accessory, the EAGR09051 can support suitable surface-preparation work before repainting, recoating, or repair.
No surface-removal rate has been claimed because it is not supplied in the product data.
Cut components can contain sharp edges or burrs that require removal before handling or assembly.
A 125mm grinder may support suitable deburring tasks where the workpiece geometry and finish requirement are appropriate.
This can be relevant to fabrication, engineering, automotive, and general workshop operations.
The application list includes polishing and surface finishing.
With a suitable compatible attachment, the EAGR09051 can support finishing requirements where the 125mm grinder format is appropriate.
Accessory selection should remain application-specific.
The supplied applications also include masonry cutting.
For suitable masonry work, buyers should ensure that the selected cutting disc is intended for the material and compatible with the 125mm grinder platform.
The product should not be treated as a substitute for specialized masonry equipment where project conditions demand a different machine.
The EMTOP EAGR09051 Angle Grinder operates from a 220–240V, 50/60Hz supply, has 900W input power, runs at 12,000 rpm, and uses a 125mm disc with an M14 spindle thread. It includes one auxiliary handle and is packed in a color box. The disc is not included.
Specification |
EAGR09051 Details |
|
Product Name |
Angle Grinder |
|
Brand |
EMTOP |
|
Model Number |
EAGR09051 |
|
Product Type |
Angle Grinder |
|
Product Category |
Power Tools |
|
Power Supply |
Corded / Mains Powered |
|
Voltage |
220–240V |
|
Frequency |
50/60Hz |
|
Input Power |
900W |
|
No-Load Speed |
12,000 rpm |
|
Disc Diameter |
125mm |
|
Spindle Thread |
M14 |
|
Auxiliary Handle |
1 Pc |
|
Disc Included |
No |
|
Packaging |
Color Box |
No disc-bore size, switch type, machine weight, cable length, guard configuration, soft-start function, vibration data, dimensions, or other unprovided specifications have been added.
The Angle Grinder EAGR09051 offers a 125mm disc platform, 900W input power, 12,000 rpm speed, and M14 spindle in a corded configuration. This makes it relevant to industrial buyers seeking a defined grinder specification for fabrication, repair, maintenance, workshop, and construction applications.
Key procurement considerations include:
125mm disc format: Buyers can standardize compatible accessories around the stated grinder size.
M14 spindle: Provides a clear accessory-interface reference.
900W input power: Establishes the tool’s stated power configuration.
12,000 rpm operating speed: Helps buyers verify accessory suitability.
Corded operation: Removes the need to manage batteries or charger availability during use.
Auxiliary handle supplied: One supporting handle is included with the tool.
Disc selected separately: Buyers can choose the correct consumable for cutting, grinding, polishing, or finishing work.
Suitability should still be checked against the actual material, accessory, operating environment, and duty requirement.
IndustrialAdda supplies the Angle Grinder EAGR09051 for B2B procurement involving fabrication units, maintenance departments, manufacturing plants, workshops, contractors, engineering businesses, and MRO operations. Buyers can submit the exact model number, required quantity, application, and delivery location for quotation and sourcing support.
IndustrialAdda can assist with:
For accurate identification, specify:
EMTOP Angle Grinder – EAGR09051
If discs or related accessories are required, include those separately because the grinder is supplied without a disc.
IndustrialAdda acts as the supplier and is not represented as the manufacturer, OEM, product designer, or technology developer of EAGR09051.
IndustrialAdda primarily supplies Angle Grinder requirements across Delhi NCR, with eligible project and quantity-based orders also supported across India. Availability and delivery depend on current sourcing position, required quantity, destination, and individual order conditions.
Primary service coverage includes business enquiries from:
Potential buyers include:
For Pan-India procurement, buyers should provide the EAGR09051 model number, quantity, and destination.
No fixed stock level or lead time has been provided in the supplied product information, so both should be confirmed at quotation stage.
To enquire for the Angle Grinder EAGR09051, share the exact product model, required quantity, delivery location, and intended cutting or grinding application with IndustrialAdda. Since no disc is included, buyers should also specify any cutting, grinding, finishing, or polishing accessories required for the planned work.
A useful procurement enquiry can include:
For larger workshops or projects, buyers can submit a consolidated tool-and-accessory requirement for sourcing review.
The EAGR09051 Angle Grinder is intended for suitable metal cutting, grinding, weld cleaning, rust removal, surface finishing, deburring, polishing, masonry cutting, fabrication, construction-site work, maintenance, and workshop repair when used with the appropriate compatible accessory.
The EAGR09051 uses a 125mm disc diameter. Buyers should select cutting, grinding, finishing, or polishing accessories that are compatible with this disc size, the tool’s M14 spindle thread, its operating speed, and the intended work material.
The EMTOP EAGR09051 has a stated input power of 900W and a no-load speed of 12,000 rpm. These specifications should be considered together with the 125mm disc size and intended accessory when assessing the grinder for an industrial application.
The EAGR09051 uses an M14 spindle thread. This is an important compatibility specification when sourcing related grinder accessories. Buyers should consider both the M14 spindle configuration and 125mm disc size before purchasing additional cutting or grinding consumables.
If your fabrication unit, construction project, maintenance department, engineering workshop, manufacturing plant, automotive operation, or MRO team requires the Angle Grinder EAGR09051, send IndustrialAdda the exact model number, required quantity, delivery destination, and intended application. Since the disc is not included, add the required cutting, grinding, polishing, or finishing accessory specification where relevant. Buyers managing wider procurement can also submit multiple product codes, quantities, technical requirements, or a complete BOM for consolidated sourcing support.
| Voltage | 220-240V~50/60Hz |
|---|---|
| Input power | 900W |
| No-load speed | 12000rpm |
| Disc diameter | 125mm |
| Spindle thread | M14 |
| Auxiliary handle | With 1pcs auxiliary handle |
| Disc | not included |
| Packaging | Packed by color box |
No. The supplied product information states that the disc is not included. Buyers should therefore include the correct compatible disc separately when preparing the purchase requirement, depending on whether the intended task involves cutting, grinding, polishing, finishing, or another suitable operation.
IndustrialAdda supplies EAGR09051 Angle Grinder requirements across its primary Delhi NCR service region. Buyers in Delhi, Noida, Gurgaon, Faridabad, Ghaziabad, and nearby industrial areas can submit the exact model, quantity, delivery location, and application for quotation and availability confirmation.
IndustrialAdda supports eligible B2B and bulk procurement enquiries. Fabrication shops, construction firms, maintenance teams, workshops, and manufacturing businesses should provide the EAGR09051 model number, required quantity, delivery location, and any disc or accessory requirement for procurement review.
IndustrialAdda has Pan-India supply capability for eligible orders, subject to product availability and individual order requirements. Buyers outside Delhi NCR should provide the EAGR09051 model number, quantity, delivery destination, and related accessory requirements so the sourcing request can be assessed accurately.
Fill in your details and our B2B team will contact you shortly.
