The Electric Drill EEDL556 is a 550W corded drilling tool intended for compatible drilling, fastening, assembly, installation and maintenance work. Its 0–3300rpm variable no-load speed provides adjustable rotational control, while a forward/reverse switch supports bidirectional operation. The EMTOP EEDL556 has a stated maximum drilling capacity of 10mm and operates from a 220–240V, 50/60Hz mains supply. One set of extra carbon brushes is included with the tool. IndustrialAdda supplies the Electric Drill for B2B requirements across Delhi NCR, with eligible Pan-India orders supported according to availability and commercial requirements.
The EEDL556 is a mains-powered Electric Drill designed primarily for rotary drilling in compatible wood, metal and plastic, along with suitable screwdriving and fastening work. Its 550W input rating, variable speed up to 3300rpm and forward/reverse control make it relevant to workshops, fabrication support, maintenance and installation operations.
The operating purpose of this model is straightforward: controlled rotary drilling from a continuous electrical supply.
Unlike the EMDL0716 Impact Drill, the supplied specification for EEDL556 does not list a hammer function.
It should therefore be evaluated as an electric rotary drill, not represented as an impact or hammer drill.
For industrial buyers, this distinction matters because tool selection should reflect the material and type of hole being produced.
The EEDL556 is relevant where users require conventional drilling capability and access to a 220–240V mains connection.
The Electric Drill combines a 550W motor input with a variable no-load speed range of 0–3300rpm and a stated 10mm maximum drilling capacity. Forward/reverse operation expands directional control, while the supplied extra carbon-brush set provides an additional service component within the packaged product configuration.
550W Input Power
The EEDL556 has an input power rating of:
550W
This is the specified electrical input for the model and provides procurement teams with a clear power reference when documenting or comparing technical requirements.
Variable Speed up to 3300rpm
The no-load speed is specified as:
0–3300rpm
Variable speed control means the drill is not restricted to a single operating speed.
The operator can adjust rotational speed according to the compatible material and drilling requirement.
10mm Maximum Drilling Capacity
The supplied specification lists:
Maximum drilling capacity: 10mm
Separate maximum capacities for wood, metal or plastic have not been provided.
The 10mm figure should therefore be retained as the general stated maximum rather than creating material-specific capacities.
Forward and Reverse Operation
The EEDL556 includes a:
Forward/Reverse switch
This allows the direction of rotation to be changed.
Reverse operation can be useful during compatible screw removal or when directional control is needed during a drilling or fastening task.
Extra Carbon Brushes Included
One distinctive package detail is:
1 set of extra carbon brushes
These brushes are supplied with the product.
No replacement interval, carbon-brush dimensions or maintenance schedule has been provided, so these details should be confirmed separately if required.
The EEDL556 supports conventional drilling and compatible fastening work in environments where a mains electrical supply is readily available. Typical use cases include workshop drilling, furniture fitting, light fabrication support, installation, assembly and maintenance work involving suitable wood, metal or plastic components.
Workshop Drilling
General engineering and repair workshops regularly need holes for brackets, components, fixtures or repair work.
The 0–3300rpm variable-speed range allows the operator to control drill speed instead of relying on a fixed rotational rate.
For procurement, the required hole diameter should remain within the tool's stated 10mm maximum drilling capacity.
Fabrication Support
Fabrication teams may need to prepare compatible holes in metal components during fitting or assembly operations.
The EEDL556 provides a 550W mains-powered drilling option for suitable tasks.
The correct drilling accessory and operating conditions should be selected according to the material being processed.
Furniture Fitting
Furniture manufacturing, fitting and installation can involve drilling pilot holes and performing compatible fastening work in wood-based materials.
The drill's forward/reverse function can support directional requirements when screwdriving is part of the operation.
Assembly Operations
Assembly teams sometimes need a powered drilling tool for mounting holes, component fitting or compatible screw fasteners.
Where the workstation already has mains electricity, a corded Electric Drill avoids the need to manage battery charging between tasks.
Installation Work
Installers may encounter wood, metal or plastic components while mounting fixtures, equipment or fabricated assemblies.
The EEDL556 can be considered where conventional rotary drilling is required and its 10mm stated capacity matches the job.
It should not be selected solely for masonry impact drilling because no hammer function is specified.
Maintenance and Repair
Plant and facility maintenance teams regularly handle minor modifications, equipment fitting and repair work.
A corded drill can provide a readily available workshop tool where the operating location has access to a compatible mains supply.
On-Site Repair
The EEDL556 can also support suitable repair tasks at powered job sites.
Because the tool requires 220–240V AC, access to an appropriate electrical source should be considered before deployment.
The EMTOP EEDL556 operates from 220–240V AC at 50/60Hz and has a 550W input rating. Its variable no-load speed ranges from 0 to 3300rpm, maximum drilling capacity is stated as 10mm, and the product includes forward/reverse operation plus one extra set of carbon brushes.
Product Parameter |
Supplied Specification |
|
Product Name |
Electric Drill |
|
Brand |
EMTOP |
|
Model |
EEDL556 |
|
Product Type |
Electric Drill |
|
Power Source |
Corded / Mains Powered |
|
Voltage |
220–240V AC |
|
Frequency |
50/60Hz |
|
Input Power |
550W |
|
No-Load Speed |
0–3300rpm |
|
Speed Control |
Variable |
|
Maximum Drilling Capacity |
10mm |
|
Direction Control |
Forward / Reverse |
|
Extra Component |
1 Set of Carbon Brushes |
|
Packaging |
Color Box |
The input places EEDL556 under Cordless Tools, but its 220–240V mains specification establishes it as a corded electric drill.
No chuck specification, cable length, drill weight, dimensions, torque rating, material-specific capacities or hammer function is provided.
These details should not be inferred from similar drills.
The EEDL556 is relevant where the purchasing requirement is conventional powered drilling rather than impact drilling. Its 550W input, variable 0–3300rpm speed, forward/reverse control and 10mm stated drilling capacity provide the essential operating functions required for compatible workshop, installation and maintenance tasks.
The mains-powered configuration can be useful for stationary or semi-stationary work areas where electricity is already accessible.
There are no battery packs to rotate or recharge during operation.
Variable speed gives the user more control over how the drill is operated across compatible materials.
Forward/reverse operation also extends the tool beyond one-direction drilling where compatible fastening or withdrawal operations are required.
The included carbon-brush set is another identifiable package component that procurement teams can record when comparing supplied configurations.
Industrial buyers should verify the model number, 10mm drilling requirement, available mains supply and intended material before ordering EEDL556. The model is specified for conventional electric drilling and does not include a stated hammer function, so applications requiring impact-assisted masonry drilling may require a different product specification.
Before raising a purchase request, consider:
For repeat procurement, specifying EEDL556 rather than only “electric drill” can reduce ambiguity during model verification.
IndustrialAdda supplies the EMTOP EEDL556 to B2B buyers requiring model-specific sourcing, quotation support, quantity-based procurement and multi-product industrial purchasing assistance. IndustrialAdda functions as the supplier and does not claim to manufacture, design or develop the Electric Drill.
A model-specific purchase request should identify:
Product: Electric Drill
Brand: EMTOP
Model: EEDL556
Power: 550W
Maximum Drilling Capacity: 10mm
IndustrialAdda can assist with model verification, commercial quotation, bulk requirements, repeat procurement and multi-brand industrial sourcing.
This can be useful for procurement departments purchasing tools alongside other maintenance, workshop or project requirements.
More information about the supplier is available through the IndustrialAdda About Us page.
IndustrialAdda's primary service region for industrial procurement is Delhi NCR, including requirements from businesses in Delhi, Noida, Gurugram, Faridabad and Ghaziabad. Eligible orders from other Indian locations may also be considered depending on current product availability, required quantity, destination and applicable order requirements.
Within Delhi NCR, the Electric Drill may be relevant to buyers from:
For requirements outside the region, businesses can submit the model and destination for supply review.
No fixed stock quantity, minimum order quantity or delivery timeline has been provided for EEDL556.
Availability should therefore be confirmed before project deadlines or maintenance schedules are finalized.
Businesses can enquire for the EMTOP EEDL556 by sharing the exact model number, quantity and delivery destination with IndustrialAdda. Adding the intended drilling material or application can help clarify the requirement, particularly when several drill types or models are being sourced under the same purchase request.
For a clear enquiry, provide:
For larger requirements, procurement teams can submit multiple product codes, technical specifications or a complete BOM through the IndustrialAdda Contact Us page.
The EMTOP EEDL556 is specified as an Electric Drill. Its supplied features include 550W input power, variable speed and forward/reverse operation, but no hammer or impact function is listed. It should therefore not be represented as an impact drill unless additional verified manufacturer documentation states otherwise.
The supplied technical information states a maximum drilling capacity of 10mm. Separate capacities for wood, metal and plastic are not specified. Buyers should therefore use 10mm as the provided capacity reference and verify application-specific requirements before procurement.
The EEDL556 has a stated no-load speed range of 0–3300rpm and includes variable speed control. This allows the operator to adjust rotational speed for compatible drilling and fastening tasks rather than operating at only one fixed speed.
Yes. The supplied product configuration includes one set of extra carbon brushes. No carbon-brush dimensions, service interval or replacement procedure is provided in the product input, so any additional maintenance information should be confirmed separately where required.
If your workshop, maintenance department, installation team or project requires a 550W Electric Drill with 0–3300rpm variable speed, 10mm maximum drilling capacity and forward/reverse operation, send IndustrialAdda the EMTOP EEDL556 model number, required quantity and delivery destination. For broader industrial procurement, you can also submit additional product codes, technical specifications, bulk quantities or a complete BOM so related requirements can be reviewed together for quotation and supply across Delhi NCR and eligible Pan-India locations.
| Voltage | 220-240V~50/60Hz |
|---|---|
| Input power | 550W |
| No-load speed | 0-3300rpm |
| Max.drilling capacity | 10mm |
| Variable speed control | Variable speed control |
| Forward/Reverse switch | Forward/Reverse switch |
| Extra carbon brushes | With 1set extra carbon brushes |
| Packaging | Packed by color box |
The supplied applications include drilling in wood, metal and plastic, along with assembly, installation, fabrication support, maintenance, workshop operations and on-site repair. Suitability for an individual job should be checked against its 550W input, 10mm maximum drilling capacity and available mains supply.
IndustrialAdda supports B2B procurement enquiries for the Emtop EEDL556 Electric Drill across Delhi NCR. Businesses can provide the model number, required quantity, application and delivery destination when requesting quotation and current availability information.
Yes. IndustrialAdda can review bulk and quantity-based requirements subject to current availability and applicable order conditions. Procurement teams should provide the number of EEDL556 units required along with the destination and any other industrial products being purchased.
Eligible requirements outside Delhi NCR may be reviewed for Pan-India supply depending on product availability, order quantity, delivery destination and commercial requirements. Businesses should submit the exact EEDL556 model number and destination so availability and supply feasibility can be confirmed.
Fill in your details and our B2B team will contact you shortly.
