EMTOP ECFS35528 Cut Off Saw

Cutting Features That Define the Cut Off Saw ECFS35528

The ECFS35528 combines a 2400W mains input with a 3900rpm operating speed and a 355mm cutting disc. Its value for industrial buyers lies in the defined cutting capacities across round pipe, square steel, rectangular sections and steel bar rather than broad unsupported claims about cutting performance.
2400W Input Power
The Cut Off Saw has a stated:
Input power: 2400W
The tool operates from a 220–240V, 50/60Hz electrical supply.
This makes mains-power availability an important workshop or site consideration.
3900rpm No-Load Speed
The specified no-load speed is:
3900rpm
This is the supplied rotational-speed reference for the ECFS35528.
No variable-speed range is provided, so the product should not be described as variable speed.
355mm × 25.4mm Cutting Disc
The machine uses a:
355mm × 25.4mm cutting disc
This is a critical accessory specification for replacement-disc procurement.
Buyers should match both the outer diameter and mounting dimension when sourcing replacement cutting discs.
Cutting Disc Included
The standard package includes:
1 × 355mm cutting disc
This gives buyers a defined supplied configuration when comparing quotations.
No disc thickness or abrasive specification has been provided.

Cutting Capacities of the Cut Off Saw

The ECFS35528 provides separate maximum cutting capacities for round pipe, square steel, rectangular sections and steel bar. These figures are particularly useful for fabrication and construction procurement because buyers can compare the saw directly with the section sizes they routinely cut.

The 100mm round-pipe capacity is relevant to pipe fabrication and installation work.
The 100mm × 100mm square-steel capacity provides a clear reference for structural or fabrication sections.
The 120mm × 100mm rectangular capacity supports another common section format.
The specified 50mm steel-bar cutting capacity gives buyers a separate reference for solid bar work.

Where the Cut Off Saw Fits in Industrial Operations

The ECFS35528 is relevant to businesses that regularly cut steel pipe, bar and structural sections before welding, fabrication, installation or repair. Its fixed cutting platform and defined section capacities make it suitable for workshop-based operations as well as powered construction sites where repeat straight cuts are required.
Fabrication Workshops
Fabrication businesses frequently cut raw steel sections before welding or assembly.
The ECFS35528 can support preparation of compatible pipes, square sections and rectangular sections within the stated capacities.
For procurement teams, the section dimensions used most often should be compared with the saw specification before ordering.
Steel Bar Cutting
The product has a stated maximum steel-bar cutting capacity of:
50mm
This makes the model relevant to workshops and maintenance environments where suitable steel bars need to be cut to length.
The actual cutting disc must also be appropriate for the material.
Pipe and Tube Cutting
Round pipe cutting is a common requirement in mechanical fabrication, structural work and installation.
The ECFS35528 supports a stated maximum round-pipe capacity of 100mm.
Businesses working with pipe above this dimension should evaluate another machine specification rather than assuming greater capacity.
Angle and Channel Work
The supplied applications include angle and channel cutting.
These sections are common in fabrication, support-frame work and construction preparation.
No angle- or channel-specific capacity is provided, so suitability should be checked against the actual section dimensions.
Construction-Site Cutting
Construction contractors may need to cut steel sections close to the installation location.
The ECFS35528 can support such work where a compatible 220–240V mains source is available.
Project buyers should also account for cutting-disc consumption when planning site quantities.
Workshop Maintenance
Maintenance departments sometimes need to modify supports, bars, pipes or fabricated replacement sections during repair work.
A dedicated Cut Off Saw can provide a repeatable cutting station for such tasks.
Metalworking Operations
General metalworking environments may use the machine as part of material preparation before drilling, welding, grinding or assembly.
For repeat production, procurement teams should plan both machine quantity and future disc requirements.

Technical Specifications of Cut Off Saw ECFS35528

The EMTOP ECFS35528 is a 2400W mains-powered Cut Off Saw operating at 3900rpm with a 355mm × 25.4mm cutting disc. It provides maximum capacities of 100mm round pipe, 100mm × 100mm square steel, 120mm × 100mm rectangular section and 50mm steel bar.

No machine weight, cutting angle range, vice specification, cable length, disc thickness or material-removal rate has been supplied.
These details should not be inferred.

Why Section Capacity Matters Before Procurement

Cut Off Saw selection should be based on the actual steel sections being processed rather than motor wattage alone. The ECFS35528 provides section-specific capacity figures, allowing procurement teams to verify compatibility with round pipe, square steel, rectangular sections and steel bar before placing project or workshop orders.
A workshop mainly cutting 80mm round pipe has a different requirement from one processing large rectangular structural sections.
Likewise, a maintenance department working primarily with steel bar should focus on the stated 50mm bar capacity.
For procurement documentation, recording both the model number and intended section sizes reduces ambiguity.
A useful internal reference is:
EMTOP ECFS35528 — 2400W — 355mm Cut Off Saw

Why the Cut Off Saw ECFS35528 Fits Metal Fabrication Requirements

The ECFS35528 is suited to workshops and project teams that need dedicated straight cutting of compatible steel sections. Its 355mm cutting disc, 2400W input and stated section capacities give buyers concrete parameters for comparing the machine with their actual fabrication or maintenance workload.
Product-specific considerations include:

• dedicated metal-cutting format
• 355mm cutting-disc size
• 3900rpm operating speed
• multiple section-capacity references
• included cutting disc
• mains-powered operation

The product is therefore better evaluated as a fabrication and section-preparation tool than as a general-purpose portable saw.

Procuring Cut Off Saw ECFS35528 Through IndustrialAdda

IndustrialAdda supports B2B procurement of the EMTOP ECFS35528 through product identification, model verification, quotation assistance and quantity-based sourcing. IndustrialAdda acts as the supplier and does not claim to manufacture, design or develop the Cut Off Saw.
For an accurate enquiry, buyers should identify:
Product: Cut Off Saw
Brand: EMTOP
Model: ECFS35528
Input Power: 2400W
Cutting Disc: 355mm × 25.4mm
IndustrialAdda can support bulk enquiries, repeat purchasing, project sourcing and wider industrial-tool procurement.
Additional company information is available through the IndustrialAdda About Us page.

Supply Coverage Across Delhi NCR and Pan-India

IndustrialAdda primarily supports Cut Off Saw procurement across Delhi NCR, including requirements from businesses in Delhi, Noida, Gurugram, Faridabad and Ghaziabad. Eligible project and quantity-based orders from other Indian locations may also be reviewed according to current availability, destination and commercial requirements.
Potential buyers include:

• fabrication workshops
• construction contractors
• engineering companies
• steel-working units
• maintenance departments
• industrial contractors
• automotive workshops
• MRO procurement teams

No fixed stock quantity, MOQ or delivery timeline has been provided for the ECFS35528.
For production or project deadlines, buyers should confirm availability before finalizing the purchasing schedule.

How to Enquire for Cut Off Saw ECFS35528

To request the EMTOP ECFS35528, provide IndustrialAdda with the exact model number, required quantity, main section sizes and delivery destination. If additional cutting discs or related fabrication tools are required, those can be included in the same enquiry so the complete procurement requirement can be reviewed together.
A clear enquiry can include:

1. Product and Model — Cut Off Saw ECFS35528
2. Required Quantity
3. Main Workpiece — round pipe, square steel, rectangular section or steel bar
4. Typical Section Size
5. Additional Disc Requirement
6. Delivery Location
7. Quotation and Availability Request

For larger project purchasing, buyers may also submit additional product codes, technical specifications or a complete BOM through the IndustrialAdda Contact Us page.

Frequently Asked Questions

1. What is the EMTOP ECFS35528 Cut Off Saw used for?

The EMTOP ECFS35528 is intended for compatible metal-cutting applications including steel bar cutting, pipe and tube cutting, square and rectangular section cutting, fabrication work, construction-site cutting and workshop operations. Its 355mm cutting disc and stated material capacities provide buyers with defined references for assessing suitability.

2. What is the maximum cutting capacity of the ECFS35528?

The ECFS35528 supports a stated maximum capacity of 100mm round pipe, 100mm × 100mm square steel, 120mm × 100mm rectangular section and 50mm steel bar. Buyers should compare their regular section sizes with these specifications before procurement.

3. What cutting disc size does the Cut Off Saw use?

The EMTOP ECFS35528 uses a 355mm × 25.4mm cutting disc. One 355mm cutting disc is supplied with the machine. Buyers sourcing replacement discs should verify both the outer diameter and mounting dimension before ordering.

4. What are the power and speed specifications of ECFS35528?

The Cut Off Saw has a stated 2400W input power and operates at a 3900rpm no-load speed. It requires a 220–240V, 50/60Hz mains electrical supply. No variable-speed range is listed in the supplied product information.

Request a Quote for Cut Off Saw ECFS35528

For fabrication workshops, construction contractors, engineering companies or maintenance teams requiring a 2400W Cut Off Saw for pipe, steel section and bar cutting, send IndustrialAdda your requirement for the EMTOP ECFS35528. Include the exact model number, required quantity, typical material dimensions and delivery destination, along with any additional cutting-disc or related tool requirements. Buyers consolidating multiple industrial purchases can also submit product codes, technical specifications or a complete BOM for quotation support across Delhi NCR and eligible Pan-India locations.