The Demolition Breaker EDBRH1701 is a 1700W mains-powered breaking tool intended for demanding concrete removal, masonry demolition, wall breaking, floor removal, trenching, foundation work and heavy construction-site demolition. It delivers a stated 45J impact force at 1400bpm and uses a HEX chuck system for compatible chisels. With a specified weight of 16kg, the EMTOP EDBRH1701 is positioned for substantial impact-driven material removal rather than drilling. IndustrialAdda supports B2B procurement across Delhi NCR, with eligible Pan-India project requirements reviewed according to availability, order quantity and delivery conditions.
The EDBRH1701 is a dedicated demolition breaker designed to transfer repeated high-impact force through a compatible chisel. Its 45J impact force, 1700W mains input and 16kg configuration make it relevant to construction and renovation teams handling concrete breaking, foundation removal and other substantial material-removal tasks.
Unlike a rotary hammer, the EDBRH1701 is not primarily selected according to drilling diameter.
Its commercial and technical relevance is centered on:
The stated 45J impact force is the main performance reference for buyers comparing the model with lower-impact breakers.
The supplied HEX chuck system also gives procurement teams a clear accessory-compatibility point when additional chisels are required.
The EDBRH1701 combines 1700W input power with a stated 45J impact force and an impact rate of 1400 blows per minute. Its 16kg tool weight and HEX chuck configuration position the breaker for substantial impact-driven demolition where dedicated material removal is required rather than rotary drilling.
45J Impact Force
The EMTOP EDBRH1701 provides:
Impact force: 45J
This is the most important impact specification supplied for the model.
For procurement teams, the 45J rating helps distinguish the EDBRH1701 from lighter breakers intended for smaller-scale chipping or demolition work.
No cubic-meter productivity or material-removal rate has been supplied, so output per hour should not be estimated.
1700W Input Power
The tool has a stated:
Input power: 1700W
It operates from a 220–240V, 50/60Hz mains electrical supply.
This makes electrical access an important site-planning consideration when the breaker is procured for project work.
1400bpm Impact Rate
The impact rate is:
1400bpm
Impact frequency should be considered together with the 45J impact-force rating.
The lower impact rate compared with some lighter breakers should not be interpreted in isolation, because the supplied impact energy per blow is significantly higher.
HEX Chuck System
The EDBRH1701 uses a:
HEX chuck system
This is the main accessory interface for the breaker.
Additional or replacement chisels should be checked for compatibility with the required HEX fitting before procurement.
16kg Tool Weight
The product is specified as a:
16kg demolition breaker
Tool weight is a significant selection factor because it affects how and where the breaker can practically be deployed.
The 16kg configuration reinforces the model's role in substantial demolition work rather than lightweight overhead or highly mobile chipping tasks.
The EDBRH1701 is suited to impact-intensive demolition tasks where contractors or maintenance teams need to remove concrete, masonry or other compatible construction material. Its 45J impact force and 16kg configuration make it particularly relevant to floor breaking, wall demolition, trench preparation and localized foundation-removal work.
Concrete Slab Breaking
Construction alteration and civil work can require removal of concrete floor slabs or localized concrete sections.
A dedicated breaker transfers repeated impact through a chisel into the material.
For this type of work, the 45J impact force is the primary product specification procurement teams should evaluate.
Project teams should still assess the actual slab thickness, reinforcement conditions and site method before determining tool quantity.
Floor and Tile Removal
Renovation projects can involve removal of floor finishes, screed, tiles or underlying compatible material.
The EDBRH1701 may be considered where manual removal would be inefficient and a heavier breaker is appropriate for the project.
The supplied two-chisel package provides an initial accessory configuration, although the exact chisel profiles are not stated.
Masonry and Wall Demolition
Building alteration can require removal of masonry sections or wall material.
The 16kg breaker is better aligned with substantial ground-level or structurally supported demolition tasks than with light finishing work.
Buyers should match the planned demolition method with site safety and structural requirements.
Trench and Channel Preparation
Civil, electrical and plumbing work may occasionally require trenches or channels through compatible hard surfaces.
The EDBRH1701 can support impact-driven material removal where a suitable chisel is used.
For project procurement, required chisel type should be clarified separately if the supplied accessories are not sufficient.
Foundation Demolition
The supplied applications identify foundation demolition as a relevant use.
Where localized foundation or base removal forms part of an approved construction or renovation plan, a 45J breaker can be considered for material-removal work.
No maximum foundation thickness or breaking depth has been supplied.
Surface Chipping
Heavy repair or refurbishment may require removal of deteriorated concrete or hardened surface layers.
A demolition breaker can support this process where a suitable chisel and working method are selected.
The tool should be chosen according to the scale of removal rather than simply its power rating.
Industrial Maintenance Demolition
Manufacturing or industrial facilities may need to remove obsolete machine foundations, equipment bases or concrete supports during plant modifications.
A mains-powered heavy breaker can be relevant where repeated impact demolition is required and the work location can support the tool's weight and electrical requirement.
The EMTOP EDBRH1701 is a 1700W corded Demolition Breaker delivering 45J impact force at 1400bpm. It uses a HEX chuck system, has a stated tool weight of 16kg, and is supplied with two chisels and one set of extra carbon brushes in BMC packaging.
Product Parameter |
EDBRH1701 Specification |
|
Product Name |
Demolition Breaker |
|
Brand |
EMTOP |
|
Model Number |
EDBRH1701 |
|
Product Category |
Power Tools |
|
Product Type |
Demolition Breaker |
|
Power Source |
Corded / Mains Powered |
|
Voltage |
220–240V AC |
|
Frequency |
50/60Hz |
|
Input Power |
1700W |
|
Impact Rate |
1400bpm |
|
Impact Force |
45J |
|
Chuck System |
HEX |
|
Tool Weight |
16kg |
|
Chisels Included |
2 pcs |
|
Extra Carbon Brushes |
1 Set |
|
Packaging |
BMC |
No chisel dimensions, chuck size, sound level, cable length, vibration measurement, breaking depth or material-removal rate has been supplied.
These values should not be inferred.
The EDBRH1701 is supplied with two chisels and one additional set of carbon brushes, with the complete tool packed in a BMC. Procurement teams should record this package configuration when comparing quotations because accessory inclusion can affect whether additional chisels need to be sourced before site deployment.
The supplied configuration contains:
The dimensions and profiles of the included chisels have not been provided.
For projects requiring specific flat, pointed or other chisel configurations, the required accessory specification should be stated separately in the enquiry.
The EDBRH1701 is relevant where the requirement is substantial impact-driven demolition rather than light chipping or drilling. Its 45J impact force, 1700W input and 16kg configuration give buyers a clearly defined heavy breaker specification for concrete, masonry and foundation-removal work.
The product's main procurement considerations are straightforward:
This helps keep the purchase decision focused on demolition capability rather than broad power-tool comparisons.
IndustrialAdda supports B2B sourcing of the EMTOP EDBRH1701 by helping buyers verify the model, submit quantity requirements and request commercial quotations. The company acts as the supplier in the transaction and can review bulk or project-based requirements without being represented as the product manufacturer or OEM.
For a precise procurement request, identify:
Product: Demolition Breaker
Brand: EMTOP
Model: EDBRH1701
Input Power: 1700W
Impact Force: 45J
Tool Weight: 16kg
IndustrialAdda can support:
More company information is available through the IndustrialAdda About Us page.
IndustrialAdda primarily supports B2B requirements across Delhi NCR, including Delhi, Noida, Gurugram, Faridabad and Ghaziabad. Project and bulk requirements for the EDBRH1701 from other Indian locations may also be reviewed depending on product availability, required quantity, destination and applicable order conditions.
Relevant buyers may include:
Because no stock position or delivery timeline has been provided, buyers should request current availability before aligning the tool with a fixed demolition schedule.
IndustrialAdda can review eligible Pan-India requirements where the project quantity and delivery destination are clearly provided.
To request the EMTOP EDBRH1701, buyers should provide IndustrialAdda with the exact model number, quantity, project application and delivery location. If additional demolition chisels or related power tools are required, these should be included in the same enquiry so the commercial requirement can be assessed as one procurement package.
A clear B2B enquiry should include:
For larger site procurement, buyers can also submit additional model numbers, technical requirements or a complete BOM through the IndustrialAdda Contact Us page.
The EDBRH1701 is intended for compatible heavy demolition work including concrete breaking, masonry demolition, floor removal, wall breaking, trenching, surface chipping and foundation removal. Its 45J impact force and 16kg configuration position it for substantial material-removal tasks rather than conventional drilling or light fastening work.
The EMTOP EDBRH1701 has a stated 45J impact force and operates at an impact rate of 1400bpm. These are the primary breaking-performance specifications supplied for the product. No demolition-output rate or material-specific breaking capacity is provided and should therefore not be estimated.
The EDBRH1701 has a specified 1700W input power and operates on 220–240V AC at 50/60Hz. It is a corded mains-powered breaker intended for impact-driven demolition applications where an appropriate electrical supply is available at the work location.
The Demolition Breaker uses a HEX chuck system. Buyers ordering additional or replacement chisels should confirm compatibility with the required HEX interface before procurement. The precise chuck dimension is not stated in the supplied product data.
For civil contractors, construction companies, renovation teams or industrial maintenance projects requiring a 1700W Demolition Breaker with 45J impact force, HEX chuck compatibility and a 16kg heavy-duty configuration, send IndustrialAdda your requirement for the EMTOP EDBRH1701. Include the exact model number, required quantity, project location and demolition application, along with any additional chisel or related tool requirements. For larger project procurement, buyers can also submit technical specifications, product codes or a complete BOM for coordinated quotation support across Delhi NCR and eligible Pan-India destinations.
| Voltage | 220-240V~50/60Hz |
|---|---|
| Input power | 1700W |
| Impact rate | 1400bpm |
| Impact force | 45J |
| HEX chuck system | HEX chuck system |
| 16Kgs demolation breaker | 16Kgs demolation breaker |
| Chisels | With 2pcs chisels |
| Extra carbon brushes | With 1set extra carbon brushes |
| Packaging | Packed by BMC |
The supplied EDBRH1701 package includes two chisels and one set of extra carbon brushes, with the complete tool packed in a BMC. The individual chisel sizes and profiles are not provided, so specific accessory requirements should be confirmed separately where necessary.
IndustrialAdda supports B2B procurement enquiries for the Emtop EDBRH1701 Demolition Breaker across Delhi NCR. Buyers can submit the exact model number, quantity, demolition application and delivery location when requesting current availability and commercial quotation information.
IndustrialAdda can review project-based and quantity requirements for the EDBRH1701 subject to current availability and order conditions. Contractors should provide the required number of breakers, project location, expected demolition application and any additional chisel requirements when requesting procurement support.
Eligible Pan-India requirements may be supported depending on product availability, quantity, delivery destination and applicable commercial conditions. Businesses outside Delhi NCR should provide the EDBRH1701 model number, required quantity and project destination so supply feasibility can be reviewed.
Fill in your details and our B2B team will contact you shortly.
