The Polisher EAPR1402 is a 1400W mains-powered surface-finishing tool intended for compatible polishing, buffing, paint correction, metal finishing, furniture polishing and restoration work. Its variable no-load speed of 1500–3600rpm allows operators to adjust rotational speed according to the finishing task, while the 180mm polishing pad diameter provides a clearly defined working interface. The EMTOP EAPR1402 also includes a lock-on switch, aluminum gearbox and D-handle. IndustrialAdda supports B2B procurement of this Polisher across Delhi NCR, with eligible Pan-India supply subject to availability and commercial requirements.
The EAPR1402 is a corded electric polisher designed for powered surface-finishing work rather than drilling, cutting or grinding. With 1400W input power, adjustable speed from 1500 to 3600rpm and a 180mm polishing-pad configuration, it is relevant to automotive, workshop, fabrication and maintenance environments requiring controlled polishing or buffing.
Polishing applications depend heavily on the surface, polishing medium, pad and operating speed.
The EAPR1402 provides variable speed control, allowing the tool speed to be adjusted instead of operating at one fixed rate.
Its supplied package includes both a hook-and-loop polishing pad and a polishing bonnet, helping define the product as a dedicated finishing tool.
For procurement teams, the main selection points are power rating, pad diameter, speed range and accessory compatibility.
The EAPR1402 combines a 1400W motor input with 1500–3600rpm variable speed and a 180mm polishing pad. A lock-on switch supports continuous operation, while the aluminum gearbox, D-handle and supplied polishing accessories form part of the stated product configuration for professional surface-finishing work.
1400W Input Power
The Polisher is specified with:
1400W input power
This provides buyers with a direct electrical performance reference when documenting the tool or comparing it with another polishing requirement.
The tool operates from a 220–240V, 50/60Hz mains supply.
1500–3600rpm Variable Speed
The no-load speed range is:
1500–3600rpm
Variable speed control allows the operator to select a suitable rotational speed within the provided range.
This is particularly relevant in polishing because different finishing stages and surface conditions may require different operating speeds.
180mm Polishing Pad Diameter
The EAPR1402 uses a:
180mm polishing pad
Pad diameter is one of the most important procurement specifications for polishing equipment because replacement pads, bonnets and compatible accessories must correspond with the tool.
Lock-On Switch
The product includes a:
Lock-on switch
This allows the switch to remain engaged during compatible continuous-use operations.
For longer polishing tasks, this feature can reduce the need to hold the trigger continuously.
Aluminum Gearbox
The EAPR1402 is specified with an:
Aluminum gearbox
This is a supplied construction detail and can be included in technical purchasing documentation.
No internal gear ratio, material grade or service-life rating has been supplied.
D-Handle Included
The package includes:
1 × D-handle
The handle provides an additional grip position while controlling the tool during polishing.
No alternate handle positions or adjustment angles have been specified.
The EAPR1402 is intended for compatible polishing and finishing work across automotive workshops, metal fabrication, furniture finishing, maintenance and restoration operations. Its 180mm pad and variable-speed range make it useful where operators need powered buffing or surface refinement across larger accessible areas.
Automotive Detailing
Automotive workshops and detailing operations may require powered polishing during vehicle surface-finishing tasks.
The variable 1500–3600rpm speed range gives operators a defined adjustment window.
The supplied polishing bonnet can form part of the initial setup, although the actual polishing compound and pad combination should be matched to the finish requirement.
Paint Correction
The supplied applications identify paint correction as a relevant use.
When compatible with the surface and polishing system, the EAPR1402 can provide controlled powered polishing across painted panels.
Because no orbit pattern or paint-specific performance specification is provided, buyers should treat the model as a rotary-style polishing tool based only on the supplied rotational-speed data.
Buffing and Surface Refinement
Buffing operations may follow earlier surface-preparation or repair stages.
The 180mm polishing interface provides a defined working diameter, while variable speed allows the operating rate to be adjusted for the compatible process.
Metal Finishing
Fabrication and maintenance workshops may need to improve the finish of suitable metal surfaces after compatible preparation work.
The EAPR1402 can be considered where a powered polishing process is appropriate.
The polishing medium and accessory should be matched to the metal and required finish.
Furniture Polishing
Furniture workshops may use powered polishing during final finishing or restoration of compatible surfaces.
The Polisher's adjustable speed can be useful where the operator wants greater control over the finishing stage.
Surface coating and polishing-medium compatibility should be confirmed before use.
Surface Restoration
Restoration work can involve refinishing surfaces that have become dull or marked.
The EAPR1402 may be relevant after appropriate surface preparation when polishing or buffing is part of the restoration process.
Workshop Finishing Operations
General workshops can use polishing tools for finishing components or surfaces after fabrication, repair or preparation work.
For B2B purchasing, the 180mm pad size and 1400W rating provide straightforward technical references.
The EMTOP EAPR1402 is a 220–240V corded Polisher rated at 1400W, with variable no-load speed from 1500 to 3600rpm and a 180mm polishing-pad diameter. Its specified configuration includes a lock-on switch, aluminum gearbox, D-handle, hook-and-loop polishing pad, polishing bonnet and extra carbon brushes.
Product Parameter |
EAPR1402 Specification |
|
Product Name |
Polisher |
|
Brand |
EMTOP |
|
Model Number |
EAPR1402 |
|
Primary Category |
Power Tools |
|
Product Type |
Polisher |
|
Power Source |
Corded / Mains Powered |
|
Voltage |
220–240V AC |
|
Frequency |
50/60Hz |
|
Input Power |
1400W |
|
No-Load Speed |
1500–3600rpm |
|
Speed Control |
Variable |
|
Polishing Pad Diameter |
180mm |
|
Switch |
Lock-On Switch |
|
Gearbox |
Aluminum |
|
Handle Included |
1 × D-Handle |
|
Polishing Pad Included |
1 × Hook & Loop Polishing Pad |
|
Bonnet Included |
1 × Polishing Bonnet |
|
Extra Carbon Brushes |
1 Set |
|
Packaging |
Color Box |
No tool weight, cable length, spindle thread, orbit specification, sound level, pad backing specification, polishing-compound recommendation or speed-step count has been provided.
These details should not be inferred from similar polishers.
Variable-speed control is one of the EAPR1402's most important functional features because polishing is not always performed effectively at one fixed rotational speed. The available 1500–3600rpm range gives operators adjustment capability across compatible finishing stages, surfaces and polishing accessories.
A lower selected speed may be relevant during a more controlled finishing step.
A higher speed within the specified range may be considered where the compatible process calls for it.
The key point for procurement teams is that the product provides an adjustable operating range rather than one single speed.
No automatic speed regulation or constant-speed electronics are listed in the source data and should not be claimed.
The 180mm pad diameter establishes the physical polishing interface of the EAPR1402 and should be considered when sourcing replacement bonnets, hook-and-loop pads or related polishing accessories. Buyers should verify accessory dimensions before repeat procurement rather than assuming compatibility from product type alone.
For organizations operating several polishing tools, recording the pad size alongside the model number can simplify consumable management.
A useful internal reference is:
EMTOP EAPR1402 — 180mm Polisher
This helps distinguish the product from smaller or larger polishing machines during accessory purchasing.
The EAPR1402 is relevant where buyers require a dedicated mains-powered polishing tool with adjustable speed and a relatively large 180mm working pad. Its 1400W rating, lock-on switch, D-handle and supplied polishing accessories support surface-finishing workflows without turning the tool into a general-purpose grinding or sanding product.
The product's main buyer-relevant characteristics are:
The included extra carbon brushes are also relevant when comparing package contents between quotations.
IndustrialAdda supports B2B procurement of the EMTOP EAPR1402 through model verification, quotation assistance, bulk-order coordination and wider industrial sourcing support. IndustrialAdda acts as the supplier and is not represented as the manufacturer, OEM, designer or technology developer of the Polisher.
For a clear purchasing enquiry, specify:
Product: Polisher
Brand: EMTOP
Model: EAPR1402
Input Power: 1400W
Pad Diameter: 180mm
IndustrialAdda can assist with:
More information about the supplier can be reviewed through the IndustrialAdda About Us page.
IndustrialAdda primarily supplies industrial products to B2B buyers across Delhi NCR, including Delhi, Noida, Gurugram, Faridabad and Ghaziabad. Eligible EAPR1402 requirements from other Indian locations may also be supported depending on current availability, order quantity, destination and individual commercial conditions.
Relevant buyers may include:
Pan-India requirements can be reviewed for eligible orders.
No fixed stock quantity, MOQ or delivery timeline has been supplied for the EAPR1402.
Buyers working against workshop schedules or project deadlines should confirm availability during quotation rather than assuming immediate dispatch.
To request the EMTOP EAPR1402, buyers should provide IndustrialAdda with the exact model number, required quantity and delivery destination. Mentioning the intended polishing application and any additional pad, bonnet or related accessory requirements can help make the commercial enquiry more complete.
A procurement request can include:
For larger workshop or project requirements, buyers can submit additional tool codes, product specifications or a complete BOM through the IndustrialAdda Contact Us page.
The EAPR1402 is intended for compatible surface polishing, automotive detailing, paint correction, buffing, metal finishing, furniture polishing and restoration work. Its 1400W mains-powered configuration and 1500–3600rpm variable speed allow buyers to evaluate it for professional finishing applications requiring a dedicated polishing tool.
The EMTOP EAPR1402 uses a 180mm polishing pad. This dimension is important when sourcing replacement hook-and-loop pads, polishing bonnets or related accessories. Buyers should verify pad compatibility rather than assuming that polishing accessories for other tool sizes will fit.
The Polisher has a specified no-load speed range of 1500–3600rpm and includes variable speed control. This allows the operator to adjust rotational speed within the stated range according to the compatible polishing or finishing requirement.
The EAPR1402 package includes one D-handle, one hook-and-loop polishing pad, one polishing bonnet and one set of extra carbon brushes. The product is packed in a color box. No additional polishing compounds or accessories are specified.
For automotive workshops, detailing teams, furniture finishing operations, fabrication businesses or maintenance departments requiring a 1400W Polisher with 1500–3600rpm variable speed and a 180mm polishing pad, send IndustrialAdda your requirement for the EMTOP EAPR1402. Include the exact model number, required quantity, delivery destination and any additional pad, bonnet or accessory requirements. For bulk or multi-product purchasing, buyers can also provide technical specifications, related tool codes or a complete BOM for coordinated quotation support across Delhi NCR and eligible Pan-India locations.
| Voltage | 220-240V~50/60Hz |
|---|---|
| Input power | 1400W |
| No-load speed | 1500-3600rpm |
| Polishing pad diameter | 180mm |
| Variable speed control | Variable speed control |
| Lock-on switch | Lock-on switch |
| Aluminum gear box | Aluminum gear box |
| D-handle | 1pcs D-handle |
| Hook&loop polishing pad | 1pcs hook&loop polishing pad |
| Polishing bonnet | 1pcs polishing bonnet |
| Extra carbon brushes | 1set extra carbon brushes |
| Packaging | Packed by color box |
Yes. The supplied product specifications include a lock-on switch. This feature can support continuous compatible polishing work where the operator does not want to keep the trigger manually engaged for the entire operating period.
IndustrialAdda supports B2B procurement enquiries for the Emtop EAPR1402 Polisher across Delhi NCR. Buyers can provide the exact model number, required quantity, intended application and delivery location when requesting current availability and quotation information.
IndustrialAdda can review quantity-based and bulk EAPR1402 requirements subject to current product availability and applicable order conditions. Automotive workshops, fabrication operations and maintenance teams should provide the number of units required and any accessory needs when requesting a quotation.
Eligible Pan-India requirements may be supported depending on product availability, quantity, destination and individual commercial conditions. Businesses outside Delhi NCR can submit the EAPR1402 model number, required quantity and delivery location for quotation and supply review.
Fill in your details and our B2B team will contact you shortly.
