The Impact Drill EMDL0716 is a mains-powered drilling tool designed for compatible drilling and impact-drilling work in masonry, brick, wood and metal. It operates from a 220–240V, 50/60Hz supply, uses a 710W input power rating, and provides variable no-load speed from 0–3000rpm. The EMTOP EMDL0716 also includes a hammer function and forward/reverse switch, with a stated maximum drilling capacity of 13mm. IndustrialAdda supports B2B procurement of this Impact Drill across Delhi NCR, with eligible Pan-India supply subject to product availability and order conditions.
The EMDL0716 is a 710W corded Impact Drill designed for conventional rotary drilling and compatible impact-assisted drilling. It provides variable speed up to 3000rpm, forward/reverse operation and a hammer function, making it relevant to construction, installation, maintenance and workshop tasks where continuous mains-powered operation is preferred.
Unlike a cordless drill, this model relies directly on a 220–240V mains supply during operation.
That means procurement teams do not need to plan separate batteries, chargers or charging cycles for the tool itself.
The hammer function adds impact-assisted drilling capability for suitable masonry-related work, while variable speed allows the operator to adjust rotational speed according to the task.
The forward/reverse switch also supports directional control for compatible drilling and fastening-related work.
The EMDL0716 combines 710W input power with a 0–3000rpm variable-speed range, hammer function and forward/reverse operation. Its stated maximum drilling capacity is 13mm, giving procurement teams a concise group of technical parameters for evaluating the drill against construction, maintenance and workshop requirements.
710W Input Power
The impact drill has a specified input power of:
710W
This is the primary power rating supplied for the EMDL0716.
For B2B procurement, the 710W value helps distinguish this model from lower- or higher-powered impact drills when preparing technical purchase documentation.
0–3000rpm Variable Speed
The no-load speed range is:
0–3000rpm
The drill includes variable speed control, allowing the rotational speed to be adjusted rather than operating only at one fixed speed.
This can be relevant where different drilling tasks require different operating speeds.
Hammer Function
The EMDL0716 includes a:
Hammer function
This adds impact-assisted action for compatible drilling into masonry and similar materials.
The actual material, bit type and hole requirement should still be checked before use.
Forward / Reverse Switch
A forward/reverse switch is included.
This enables directional rotation to be changed where the operation requires it.
For installation and maintenance tasks, reverse operation can also be relevant when backing out compatible screws or withdrawing a drill bit.
13mm Maximum Drilling Capacity
The supplied product information states:
Maximum drilling capacity: 13mm
No separate drilling capacities are provided for wood, metal or masonry.
The 13mm figure should therefore be treated as the stated maximum drilling capacity without inventing material-specific values.
The EMDL0716 is relevant to drilling and impact-drilling applications across construction, renovation, installation, maintenance and workshop environments. Its mains-powered 710W configuration is especially suited to locations where a reliable power outlet is available and users need continuous drilling without managing battery charging cycles.
Masonry and Brick Drilling
Construction and installation work commonly requires holes in brick or compatible masonry for fixings, plugs or mounting points.
The hammer function is the most relevant feature for this type of task.
Buyers should match drill bits and hole requirements to the actual substrate rather than assuming universal masonry performance.
Wood Drilling
Workshop and installation teams may need holes in timber or wood-based components.
The drill's variable speed allows rotational speed to be adjusted according to the operation.
No wood-specific maximum drilling diameter has been provided, so only the overall stated capacity should be cited.
Metal Drilling
Fabrication and maintenance tasks can involve drilling compatible metal sections, brackets or components.
The 0–3000rpm variable-speed range provides operators with adjustable speed capability.
Bit selection and operating speed should be matched to the material and hole requirement.
Anchor and Plug Installation
Installation contractors frequently need to prepare holes for plugs and compatible anchors.
The EMDL0716 can support the drilling stage where the material and hole requirement align with its supplied specifications.
Procurement teams may include the tool as part of installation kits or project tool lists.
Renovation Work
Renovation projects often involve drilling into a mix of materials.
A corded impact drill may be useful where repeated drilling is required and mains power is readily available.
The combination of rotary drilling, hammer function and variable speed makes the model relevant to mixed renovation tasks.
Workshop Maintenance
Maintenance departments may need a drill for brackets, covers, mounting points or general workshop repair.
A mains-powered model can be useful where the drill will normally operate close to an available electrical supply.
On-Site Installation
Electrical, mechanical and general installation teams may use the EMDL0716 for compatible drilling and fastening support tasks.
Because it is corded, procurement planning should account for access to the stated 220–240V mains supply at the work location.
The EMTOP EMDL0716 is a corded Impact Drill operating on 220–240V AC at 50/60Hz. It has a 710W input rating, variable no-load speed up to 3000rpm, 13mm maximum drilling capacity, forward/reverse control and a hammer function.
Specification |
EMDL0716 Details |
|
Product Name |
Impact Drill |
|
Brand |
EMTOP |
|
Model Number |
EMDL0716 |
|
Product Category |
Cordless Tools |
|
Product Type |
Impact Drill |
|
Rated Voltage |
220–240V AC |
|
Frequency |
50/60Hz |
|
Input Power |
710W |
|
No-Load Speed |
0–3000rpm |
|
Maximum Drilling Capacity |
13mm |
|
Speed Control |
Variable |
|
Rotation Control |
Forward / Reverse |
|
Hammer Function |
Included |
|
Packaging |
Color Box |
The supplied category field lists the product under Cordless Tools, but the technical data clearly describes a corded mains-powered impact drill. The product itself should therefore be treated as a corded Impact Drill.
No chuck type, chuck size, impact-rate figure, cable length, tool weight, dimensions or material-specific drilling capacities have been provided.
The EMDL0716 can be relevant where users need drilling and hammer-drilling capability without planning around battery state or charger availability. Its 220–240V mains operation, 710W input power and variable 0–3000rpm speed range make it practical for fixed workshops and powered project locations.
The main procurement distinction is the power source.
A cordless drill prioritizes mobility away from mains power.
A corded drill instead depends on an electrical supply but removes the need for battery packs and charging cycles.
For workshop or construction environments where mains access is already available, this can simplify day-to-day tool readiness.
The variable-speed control also gives the operator more control over rotational speed for different compatible drilling tasks.
The EMDL0716 should be evaluated primarily against required drilling capacity, power supply, speed control and the need for impact drilling. Buyers should confirm that a 13mm maximum drilling capacity and 710W corded configuration match the intended work before finalizing quantity-based or project procurement.
Key procurement questions include:
These checks help keep the purchase focused on the actual operating requirement rather than broad tool-category descriptions.
IndustrialAdda supports B2B procurement of the EMTOP EMDL0716 through model verification, quotation assistance, quantity-based purchasing and multi-product industrial sourcing. IndustrialAdda acts as the supplier and is not represented as the manufacturer, OEM, designer or technology developer of the Impact Drill.
For a clear commercial enquiry, specify:
Product: Impact Drill
Brand: EMTOP
Model: EMDL0716
Input Power: 710W
Maximum Drilling Capacity: 13mm
IndustrialAdda can support:
Where several tools are being purchased for a workshop or site, procurement teams can submit multiple model numbers or a complete BOM.
More information is available through the IndustrialAdda About Us page.
IndustrialAdda primarily supplies industrial products to businesses across Delhi NCR from New Delhi. Eligible Impact Drill requirements from other parts of India may also be supported depending on product availability, order quantity, delivery destination and applicable commercial conditions.
Primary Supply Region
Enquiries may be submitted from:
Potential buyers include:
Pan-India Procurement
Businesses outside Delhi NCR can also submit EMDL0716 requirements.
Pan-India fulfilment remains subject to current availability, required quantity and destination.
No fixed stock level, MOQ or delivery timeline has been supplied.
Project buyers working against site deadlines should therefore confirm availability before finalizing purchase schedules.
To request the EMTOP EMDL0716, provide IndustrialAdda with the exact model number, required quantity and delivery location. Where the drill is being purchased for a project, buyers may also mention the material, drilling application and expected quantity so the commercial requirement can be reviewed more accurately.
A practical enquiry can include:
Procurement teams handling multiple tools can also submit related model numbers, technical specifications or a complete BOM through the IndustrialAdda Contact Us page.
The EMTOP EMDL0716 is designed for compatible rotary and impact-assisted drilling in applications such as masonry, brick, wood, metal, renovation, maintenance and installation work. Its hammer function is relevant to compatible masonry drilling, while variable speed supports adjustment for different drilling tasks.
The Impact Drill has a specified 710W input power rating and operates on 220–240V AC at 50/60Hz. This is a mains-powered tool, so it does not depend on a battery or charger during operation.
The supplied specification states a maximum drilling capacity of 13mm. Separate material-specific drilling capacities for wood, metal or masonry are not provided, so procurement teams should avoid assuming larger or different values for individual materials.
Yes. The EMDL0716 includes variable speed control with a no-load speed range of 0–3000rpm. This allows rotational speed to be adjusted according to the compatible drilling or fastening requirement.
For construction contractors, maintenance teams, fabrication workshops, installation crews or renovation projects requiring a mains-powered drill with variable speed and hammer functionality, send IndustrialAdda your requirement for the EMTOP EMDL0716 Impact Drill. Include the exact model number, required quantity, delivery destination and relevant drilling application. For larger project or multi-tool requirements, procurement teams can also submit related product codes, technical specifications or a complete BOM for coordinated quotation support across Delhi NCR and eligible Pan-India locations.
| Voltage | 220-240V~50/60Hz |
|---|---|
| Input power | 710W |
| No-load speed | 0-3000rpm |
| Max.drilling capacity | 13mm |
| Variable speed control | Variable speed control |
| Forward/Reverse switch | Forward/Reverse switch |
| Hammer function | Hammer function |
| Packaging | Packed by color box |
Yes. The product specification includes a hammer function, making the tool suitable for compatible impact-assisted drilling work. A forward/reverse switch is also included for directional control during relevant drilling or fastening-related operations.
IndustrialAdda supports B2B procurement enquiries for the Emtop EMDL0716 Impact Drill across Delhi NCR. Buyers can submit the exact model number, quantity, delivery location and intended application when requesting current availability and quotation information.
IndustrialAdda can review quantity-based and bulk procurement requirements for EMDL0716 subject to product availability and order conditions. Businesses should provide the required quantity, destination and project or workshop requirement for commercial review.
Eligible requirements outside Delhi NCR may be supported depending on current product availability, order quantity, delivery destination and applicable commercial conditions. Buyers should submit the EMDL0716 model and exact destination for quotation and supply review.
Fill in your details and our B2B team will contact you shortly.
