EMTOP ERHRP1502 Rotary Hammer

Performance Features of the Rotary Hammer ERHRP1502

The ERHRP1502 combines 1500W mains power with 5.5J impact energy, 4400 impacts per minute and an 850rpm no-load speed. Its SDS Plus chuck and anti-vibration system support demanding concrete, masonry and chiselling work, while the supplied drill and chisel set provides an initial accessory configuration for compatible applications.
1500W Input Power
The tool has a specified:
Input power: 1500W
This is the primary electrical power rating for the ERHRP1502.
The tool operates from a 220–240V, 50/60Hz mains supply, so site or workshop use requires access to an appropriate electrical source.
5.5J Impact Energy
The ERHRP1502 provides:
Impact energy: 5.5J
Impact energy is a key performance parameter for a rotary hammer because it describes the energy delivered through the hammering mechanism.
Procurement teams should compare this value with their expected concrete-drilling or chiselling workload.
4400bpm Impact Rate
The impact rate is specified as:
4400bpm
This represents the stated number of hammer impacts per minute.
It should be considered together with impact energy rather than used as a standalone selection parameter.
850rpm No-Load Speed
The no-load rotational speed is:
850rpm
This provides buyers with the main rotational-speed specification for the model.
No variable-speed range has been supplied, so only the stated 850rpm value should be presented.
SDS Plus Chuck System
The Rotary Hammer uses an:
SDS Plus chuck system
This is particularly important for accessory procurement.
Replacement drills and chisels should be checked for SDS Plus compatibility before ordering.
Anti-Vibration System
The EMTOP ERHRP1502 includes an:
Anti-vibration system
This is a product-specific feature included in the supplied data and is relevant where buyers are comparing tool configurations for repeated drilling and chiselling work.
No numerical vibration value has been provided.

Drilling Capacities Buyers Can Use for Selection

The ERHRP1502 provides clearly stated maximum drilling capacities for three materials: 32mm in concrete, 13mm in steel and 40mm in wood. These figures allow procurement teams to compare the Rotary Hammer against actual hole-size requirements before committing to project or workshop quantities.

The 32mm concrete capacity is the most commercially relevant figure for buyers evaluating the product as a rotary hammer.
The steel and wood capacities broaden the stated drilling range but do not change the product's primary role as a hammering and chiselling power tool.

Construction and Maintenance Applications of ERHRP1502

The Rotary Hammer is suited to work where concrete drilling, masonry drilling, anchor-hole preparation or chiselling forms part of the job. Typical users include construction contractors, electrical and plumbing installers, renovation teams and maintenance departments requiring a mains-powered SDS Plus tool for repeated site work.
Concrete Drilling
Structural and installation teams frequently need holes in concrete for mechanical fixings, anchors or service supports.
The ERHRP1502 has a stated 32mm maximum concrete drilling capacity.
For procurement, the required hole diameter and SDS Plus drill size should be checked before tool selection.
Masonry Drilling
Brick and masonry surfaces can require impact-assisted drilling during building services installation or renovation work.
The Rotary Hammer's 5.5J impact energy and 4400bpm impact rate define the hammering capability supplied for this model.
Anchor Installation
Mechanical, electrical and civil installation teams often drill holes before placing compatible anchors.
The SDS Plus chuck makes accessory identification straightforward, while the 32mm concrete capacity provides a clear maximum reference for drilling requirements.
Chiselling Work
The supplied package includes two chisels, establishing chiselling as one of the intended functions.
This can be relevant to compatible material removal, channel preparation or localized demolition work.
The tool should not be represented as a dedicated demolition breaker because no such product classification is supplied.
Electrical Installation
Electrical contractors may need to prepare openings, fixing points or channels in masonry during installation work.
The Rotary Hammer can support compatible drilling and chiselling where the site has mains power and the accessory matches the task.
Plumbing Installation
Plumbing and mechanical contractors may require holes through masonry or concrete for supports, services or fixture preparation.
For project purchasing, teams should verify hole dimensions and required accessories before bulk procurement.
Renovation Work
Renovation often combines drilling with localized material removal.
The ERHRP1502's drill-and-chisel configuration makes it relevant where one tool needs to handle both compatible hole-making and chiselling tasks.
Maintenance and Repair
Industrial maintenance teams may occasionally need to install equipment supports, create fixing points or remove localized material in concrete areas.
A corded Rotary Hammer can be useful where repeated impact drilling is required and power access is readily available.

Technical Specifications of Rotary Hammer ERHRP1502

The EMTOP ERHRP1502 is a 1500W corded Rotary Hammer operating at 850rpm and 4400bpm with 5.5J impact energy. It uses an SDS Plus chuck, includes anti-vibration functionality, drills up to 32mm in concrete, and is supplied with three drills, two chisels and extra carbon brushes.

No tool weight, cable length, chisel dimensions, drill-bit sizes, operating-mode count, sound level or numerical vibration rating has been supplied.
These specifications should not be inferred.

What Comes with the ERHRP1502?

The ERHRP1502 is supplied as a packaged Rotary Hammer set with three drills, two chisels and one extra set of carbon brushes. The complete tool and accessories are packed in a BMC, giving buyers a defined package configuration for quotation comparison and repeat purchasing.
The supplied package contains:

• 1 × Rotary Hammer ERHRP1502
• 3 × Drills
• 2 × Chisels
• 1 × Extra Set of Carbon Brushes
• BMC packaging

The exact dimensions of the drills and chisels are not listed.
If a project requires specific SDS Plus bit or chisel sizes, those should be confirmed separately when raising the procurement request.

Why the SDS Plus System Matters for Procurement

SDS Plus compatibility is central to the ERHRP1502 because drill and chisel accessories need to match the tool's chuck system. Procurement teams should retain both the ERHRP1502 model number and SDS Plus specification when ordering replacement accessories or planning repeat tool purchases.
Accessory compatibility can directly affect site readiness.
A drill or chisel intended for another interface may not fit the tool even if the working diameter appears correct.
A useful procurement reference is:
EMTOP ERHRP1502 — SDS Plus Rotary Hammer
This helps purchasing teams identify the correct accessory family alongside the tool model.

Why Choose ERHRP1502 for Construction Drilling and Chiselling?

The ERHRP1502 is relevant where buyers need one mains-powered tool for demanding impact drilling and compatible chiselling. Its 5.5J impact energy, 32mm concrete capacity, SDS Plus interface and supplied chisel set align the product with construction, renovation and installation work rather than ordinary rotary drilling alone.
Its main buyer-relevant attributes are:

• 1500W input power
• 5.5J impact energy
• 4400bpm impact rate
• 32mm concrete drilling capacity
• SDS Plus chuck system
• Anti-vibration system
• Drill and chisel accessories included

For procurement teams, these specifications provide a clear technical basis for comparing the model against site requirements.

Procuring the Rotary Hammer Through IndustrialAdda

IndustrialAdda supports B2B sourcing of the EMTOP ERHRP1502 through model verification, quotation assistance, quantity-based procurement and multi-product industrial sourcing. IndustrialAdda acts as the supplier and is not represented as the manufacturer, OEM, product designer or technology developer of the Rotary Hammer.
For a clear enquiry, specify:
Product: Rotary Hammer
Brand: EMTOP
Model: ERHRP1502
Input Power: 1500W
Impact Energy: 5.5J
Concrete Capacity: 32mm
IndustrialAdda can support model-specific quotations, project quantities, repeat procurement, related drill or chisel requirements and wider industrial-tool sourcing.
Buyers can review more supplier information through the IndustrialAdda About Us page.

Delhi NCR Supply and Pan-India Requirements

IndustrialAdda primarily supports Rotary Hammer procurement across Delhi NCR, including businesses and contractors operating in Delhi, Noida, Gurugram, Faridabad and Ghaziabad. Eligible project and bulk requirements from other locations in India may also be reviewed depending on current product availability, quantity and delivery conditions.
Potential buyers include:

• Construction contractors
• Renovation companies
• Electrical contractors
• Plumbing contractors
• Engineering businesses
• Maintenance departments
• Industrial project teams
• MRO procurement operations

No fixed stock level, minimum order quantity or delivery timeline has been provided for the ERHRP1502.
Project buyers should therefore request current availability before aligning the tool with site mobilization or deadline requirements.

How to Enquire for Rotary Hammer ERHRP1502

To request the EMTOP ERHRP1502, provide IndustrialAdda with the exact model number, required quantity, delivery location and intended drilling or chiselling requirement. Buyers can also include required SDS Plus bit sizes, chisel requirements or related project tools so the quotation reflects the complete procurement need.
A structured enquiry should include:

1. Model — ERHRP1502
2. Quantity — number of Rotary Hammers required
3. Application — concrete drilling, anchor work, chiselling, renovation or installation
4. Accessory Requirement — additional SDS Plus drills or chisels where relevant
5. Delivery Destination — Delhi NCR or another Indian location
6. Commercial Request — quotation and availability

For larger project purchasing, procurement teams can submit additional tool codes, technical requirements or a complete BOM through the IndustrialAdda Contact Us page.

Frequently Asked Questions

1. What is the EMTOP ERHRP1502 Rotary Hammer used for?

The ERHRP1502 is intended for compatible concrete and masonry drilling, anchor installation, chiselling, renovation and light-demolition work. Its 5.5J impact energy, SDS Plus chuck and included chisels make it relevant to construction, electrical, plumbing and maintenance teams that need impact drilling and material-removal capability.

2. What is the maximum concrete drilling capacity of ERHRP1502?

The supplied specification states a maximum concrete drilling capacity of 32mm. The tool is also specified for up to 13mm in steel and 40mm in wood. Buyers should compare these values with actual drilling requirements before selecting quantities for a project.

3. How much impact energy does the Rotary Hammer provide?

The EMTOP ERHRP1502 provides a stated 5.5J impact energy and an impact rate of 4400bpm. These figures are key specifications for buyers evaluating the tool for impact drilling or compatible chiselling work.

4. What chuck system does the ERHRP1502 use?

The Rotary Hammer uses an SDS Plus chuck system. Replacement drills and chisels should therefore be checked for SDS Plus compatibility before procurement. The package already includes three drills and two chisels, although their individual sizes are not specified.

Request a Quote for Rotary Hammer ERHRP1502

For construction projects, renovation teams, electrical and plumbing contractors, industrial maintenance departments or site crews requiring a 1500W Rotary Hammer with 5.5J impact energy, SDS Plus compatibility and up to 32mm concrete drilling capacity, send IndustrialAdda your requirement for the EMTOP ERHRP1502. Include the model number, required quantity, delivery destination and any additional drill or chisel specifications. For larger project procurement, buyers can also submit related tool codes, technical specifications or a complete BOM for coordinated quotation support across Delhi NCR and eligible Pan-India locations.