EMTOP ERSW7501 Reciprocating Saw

Key Cutting Features of the ERSW7501

The ERSW7501 combines 750W rated power with a variable 900–3300rpm speed range and a 25mm stroke length. The SDS blade-change chuck supports blade replacement, while separate stated cutting depths for wood, steel and aluminum give buyers a clear way to assess suitability before procurement.
750W Rated Power
The reciprocating saw has a specified:
Rated power: 750W
This provides a clear electrical reference for the model.
The saw requires mains power during operation, making it more relevant to workshops and powered job sites than to cordless-only work areas.
900–3300rpm Variable Speed
The stated no-load speed is:
900–3300rpm
A variable speed range allows the operator to adjust cutting action according to the compatible material and task.
No recommended speed settings for specific materials have been supplied, so these should not be invented.
25mm Stroke Length
The supplied stroke length is:
25mm
Stroke length describes the linear travel of the blade during each reciprocating cycle.
For procurement teams, this is an important mechanical specification when comparing reciprocating saw models.
SDS Blade-Change Chuck
The saw includes an:
SDS blade-change chuck
This is a key practical feature because reciprocating saws often require blade changes when moving between wood and metal cutting.
The exact blade interface dimensions have not been supplied.
Wood and Metal Blades Included
The standard package contains:

• 1 × metal saw blade
• 1 × wood saw blade
• 1 × hex key

This gives buyers a defined starter accessory package for compatible applications.

Material Cutting Capacities of the Reciprocating Saw

The ERSW7501 has stated maximum cutting depths of 115mm in wood, 8mm in steel and 12mm in aluminum. These material-specific capacities are among the most important specifications for procurement because they allow buyers to check the saw directly against expected workpiece thickness before ordering.

The 115mm wood cutting depth makes the model relevant to timber and renovation work within the supplied capacity.
The 8mm steel and 12mm aluminum values provide separate technical references for fabrication, maintenance and repair applications.
No cutting capacities have been supplied for plastic or PVC, even though those materials are listed among potential applications.

Where the ERSW7501 Fits in Industrial Cutting Work

The Reciprocating Saw is useful where users need flexible cutting access, especially during maintenance, demolition, pipe work and renovation. Its blade-based design and stated capacities in wood, steel and aluminum make it suitable for mixed-material environments where one tool may need to handle several cutting scenarios.
Renovation and Demolition Cutting
Renovation crews often encounter mixed materials that need to be removed, shortened or separated during modification work.
A reciprocating saw can be useful for accessible demolition cuts where a compatible blade is installed.
The 25mm stroke and variable speed provide defined operating parameters for this type of task.
Timber and Wood Cutting
Construction and maintenance teams may need to cut wooden supports, boards or framing sections during repair or alteration work.
The ERSW7501 has a stated 115mm maximum wood cutting depth.
Buyers should match the required cut thickness to this specification.
Steel Cutting
Fabrication and MRO teams may need to cut compatible steel sections, pipes or repair components.
The EMTOP ERSW7501 has a stated 8mm steel cutting depth.
The supplied metal saw blade provides an initial accessory for compatible work.
Aluminum Cutting
The specified maximum aluminum cutting depth is:
12mm
This gives engineering and maintenance buyers another material-specific reference when evaluating the saw for fabrication or modification work.
Pipe Cutting
Pipe cutting is included among the intended applications.
A reciprocating saw may be particularly useful where access is restricted and a circular saw would be impractical.
The appropriate blade and actual pipe material should be checked before use.
Plastic and PVC Cutting
The supplied applications include plastic and PVC cutting.
The ERSW7501 may support these tasks with compatible blades, although no material-specific maximum cutting depth has been provided for plastic or PVC.
Flush and Localized Cuts
Reciprocating saws can be relevant where users need localized cuts close to an existing surface or within a partially assembled structure.
The actual suitability depends on blade shape, workpiece position and available access.
Maintenance and Repair
Industrial maintenance teams often face mixed cutting requirements during equipment replacement, installation changes or repair work.
A single reciprocating saw with wood and metal blade capability can support multiple compatible tasks across a maintenance environment.

Technical Specifications of Reciprocating Saw ERSW7501

The EMTOP ERSW7501 is a 750W corded Reciprocating Saw operating on 220–240V at 50/60Hz. It offers 900–3300rpm no-load speed, a 25mm stroke length, SDS blade-change chuck, and stated maximum cutting depths of 115mm in wood, 8mm in steel and 12mm in aluminum.

No tool weight, cable length, blade dimensions, plastic cutting depth, vibration figures or sound levels have been supplied.
These details should not be inferred.

Why Blade Selection Matters with the ERSW7501

The ERSW7501 is designed to work across different materials, so blade selection is central to practical use. The supplied package includes one wood blade and one metal blade, while future replacement blades should be selected according to the material, cut requirement and compatibility with the saw's blade-change system.
For workshops handling mixed-material tasks, blade procurement should be planned alongside the tool.
A useful internal reference is:
EMTOP ERSW7501 — 750W Reciprocating Saw
For repeat maintenance work, buyers may also want to track:

• required blade types
• typical materials
• number of active operators
• replacement blade consumption

The uploaded specification does not list individual blade dimensions or tooth configurations.

Why the ERSW7501 Suits Mixed-Material Cutting

The ERSW7501 is relevant where users need one corded cutting tool for multiple compatible materials rather than a saw dedicated to only one workpiece type. Its variable speed, 25mm stroke, SDS blade-change system and material-specific cutting depths support flexible cutting requirements in construction, maintenance and renovation work.
Product-specific advantages supported by the brief include:

• variable 900–3300rpm speed
• 25mm stroke
• SDS blade change
• 115mm wood capacity
• 8mm steel capacity
• 12mm aluminum capacity
• wood and metal blades supplied

This makes the model especially relevant to buyers whose workload changes between materials.

Procuring ERSW7501 Through IndustrialAdda

IndustrialAdda supports B2B sourcing of the EMTOP ERSW7501 through model verification, quotation assistance, quantity-based procurement and broader industrial product sourcing. IndustrialAdda acts as the supplier and does not claim to manufacture, design or develop the Reciprocating Saw.
For a precise procurement request, identify:
Product: Reciprocating Saw
Brand: EMTOP
Model: ERSW7501
Rated Power: 750W
Stroke Length: 25mm
IndustrialAdda can support requirements from construction contractors, fabrication workshops, maintenance teams, engineering businesses and MRO departments.
More company information is available through the IndustrialAdda About Us page.

Supply Coverage Across Delhi NCR and Other Locations

IndustrialAdda primarily serves B2B buyers across Delhi NCR, including Delhi, Noida, Gurugram, Faridabad and Ghaziabad. Eligible bulk, project and repeat requirements for the ERSW7501 from other Indian locations can also be reviewed depending on product availability, order quantity and delivery conditions.
Relevant buyers may include:

• construction contractors
• renovation companies
• fabrication workshops
• maintenance departments
• plumbing contractors
• engineering firms
• MRO teams
• industrial service companies

No fixed stock position, MOQ or delivery timeline has been provided for ERSW7501.
Buyers with active project deadlines should request current availability before finalizing deployment or purchasing schedules.

How to Submit an Enquiry for ERSW7501

To request the EMTOP ERSW7501 Reciprocating Saw, provide IndustrialAdda with the exact model number, required quantity, delivery destination and primary cutting application. If additional wood or metal blades are needed, mention those requirements so the quotation reflects the complete procurement need.
A practical enquiry can include:

1. Product and Model — Reciprocating Saw ERSW7501
2. Required Quantity
3. Main Cutting Material — wood, steel, aluminum, pipe or another compatible material
4. Blade Requirement
5. Delivery Location
6. Quotation and Availability Request

For project or multi-product procurement, businesses can also submit additional product codes, technical specifications or a complete BOM through the IndustrialAdda Contact Us page.

Frequently Asked Questions

1. What is the EMTOP ERSW7501 Reciprocating Saw used for?

The ERSW7501 is intended for compatible wood, steel, aluminum, plastic, PVC and pipe cutting, along with demolition, renovation, maintenance and on-site repair work. Its variable speed and reciprocating blade action make it particularly relevant where users need flexible cutting access rather than a fixed straight-cutting setup.

2. What is the maximum wood cutting depth of the ERSW7501?

The EMTOP ERSW7501 has a stated maximum wood cutting depth of 115mm. This provides a direct technical reference for timber, renovation and workshop cutting. Buyers should compare their expected workpiece thickness with this value before procurement.

3.How much steel and aluminum can the ERSW7501 cut?

The supplied specification states a maximum steel cutting depth of 8mm and a maximum aluminum cutting depth of 12mm. These figures should be used as the stated material-specific capacities for procurement evaluation.

4. What speed and stroke does the Reciprocating Saw provide?

The ERSW7501 operates across a stated 900–3300rpm no-load speed range and uses a 25mm stroke length. These two specifications define the principal reciprocating movement characteristics supplied for the model.

Request a Quote for Reciprocating Saw ERSW7501

For construction, renovation, fabrication, maintenance or repair work requiring flexible cutting across wood, steel, aluminum or compatible pipe materials, send IndustrialAdda your requirement for the EMTOP ERSW7501 Reciprocating Saw. Include the exact model number, required quantity, primary cutting material, blade requirements and delivery destination. Buyers consolidating a larger industrial purchase can also submit additional model codes, technical specifications or a complete BOM for coordinated quotation support across Delhi NCR and eligible Pan-India locations.