The Spray Gun ESGN50001 is a 550W electric paint and coating application tool developed for compatible finishing work on furniture, wood, metal, cabinets, panels, equipment and other prepared surfaces. It delivers a stated maximum flow of 850ml/min at a spraying pressure of 0.1–0.2 Bar and uses an 800ml material container. The EMTOP ESGN50001 also includes a 2.0m power cord and shoulder strap to support practical handling around the work area. IndustrialAdda supplies this Spray Gun for B2B requirements across Delhi NCR, while eligible project and quantity-based orders can also be reviewed for Pan-India supply.
The ESGN50001 is a mains-powered Spray Gun for applying compatible paints and coating materials through a controlled spray process. With 550W input power, an 850ml/min maximum flow and an 800ml container, it is relevant to workshops, finishing operations, fabrication businesses and maintenance teams requiring electrically powered surface coating.
The EMTOP ESGN50001 operates on a 220–240V, 50/60Hz electrical supply.
Its role is focused on surface application rather than material removal or machining. Coating material is held in the integrated container and delivered through the spraying system onto the prepared work surface.
For procurement teams, four product parameters are particularly relevant:
The product also has a 2.0m power cord, which provides a defined reference when planning workstation access to a mains connection.
The Spray Gun combines a 550W electrical input with 0.1–0.2 Bar spraying pressure and a maximum flow of 850ml/min. An 800ml container holds the coating material, while the 2.0m power cord and supplied shoulder strap provide additional handling flexibility during suitable painting and refinishing tasks.
850ml/min Maximum Flow
The stated maximum flow is:
850ml/min
This specification identifies the maximum material-flow rating supplied for the ESGN50001.
It gives buyers a useful reference when assessing the model for coating and finishing workloads.
Actual material consumption and surface coverage will depend on the coating, application method and workpiece, so a fixed coverage rate should not be assumed.
50 DIN-s Maximum Viscosity
The model has a stated maximum viscosity of:
50 DIN-s
Coating viscosity is important because material flow characteristics affect suitability for spray application.
The package includes a viscosity measuring cup, allowing viscosity to be considered as part of material preparation.
The provided specifications do not identify particular paint formulations or coating chemistries as compatible.
800ml Material Container
The Spray Gun has an:
800ml container capacity
This defines how much coating material the supplied container can accommodate.
For production or workshop use, buyers can consider this capacity alongside their normal batch sizes, workpiece dimensions and frequency of coating operations.
2.0m Power Cord
A 2.0m power cord is specified for the ESGN50001.
This is particularly relevant when planning workbench or finishing-area layouts because the Spray Gun requires mains electrical power.
Where the operating point is farther from the available electrical connection, site arrangements should be planned accordingly.
Shoulder Strap Included
A shoulder strap forms part of the supplied package.
This provides an additional handling option during compatible spraying work.
No unsupported ergonomic or fatigue-reduction claims should be attached to the accessory.
The ESGN50001 Spray Gun can support compatible painting and coating work across furniture manufacturing, wood finishing, fabrication, automotive workshops, cabinet production and maintenance environments. Its 850ml/min maximum flow, 800ml container and supplied handling accessories provide defined specifications for assessing suitability against individual finishing requirements.
Furniture Production and Refinishing
Furniture workshops frequently handle tables, frames, panels, cabinets and other components that require surface finishing.
The Spray Gun can be considered for compatible coating materials within its stated viscosity limit.
For businesses operating multiple finishing stations, procurement quantity should reflect the number of active operators and expected production workload.
Woodworking Applications
Woodworking businesses may require spray application for prepared wooden panels, furniture components or fabricated products.
The ESGN50001 provides an electrically powered spraying method with an 800ml material container.
Before application, the intended coating should be checked against the stated 50 DIN-s maximum viscosity.
Fabricated Metal Components
Fabrication units may need to coat frames, brackets, enclosures, panels or other fabricated metal parts as part of finishing or maintenance operations.
The 850ml/min maximum flow provides a product-level reference for assessing the Spray Gun.
Actual finish requirements will depend on the selected coating material and application process.
Cabinet and Panel Finishing
Cabinet production often involves repeated coating across doors, panels and assembled surfaces.
A spray-based tool may be suitable where the material characteristics fall within the product specifications.
The included viscosity measuring cup can support checking of coating viscosity before spraying.
Workshop Refinishing
Automotive and general engineering workshops can encounter refinishing requirements during repair or refurbishment work.
The supplied applications identify automotive refinishing as a potential use for the ESGN50001.
No claim is made regarding a specific automotive coating, finish grade or professional paint system.
Maintenance and Equipment Coating
MRO teams may need to repaint or recoat compatible equipment surfaces during refurbishment or scheduled maintenance.
The ESGN50001 can serve as a dedicated electric spraying tool where its material and operating specifications match the job.
For distributed maintenance teams, buyers may need to plan quantities according to the number of work locations.
The EMTOP ESGN50001 operates at 220–240V and 50/60Hz with a 550W input rating. Its supplied spraying specifications include 0.1–0.2 Bar pressure, 850ml/min maximum flow, 50 DIN-s maximum viscosity and an 800ml container, together with a 2.0m power cord.
Product Detail |
Specification |
|
Product Name |
Spray Gun |
|
Brand |
EMTOP |
|
Model Number |
ESGN50001 |
|
Product Category |
Power Tools |
|
Product Type |
Spray Gun |
|
Power Source |
Mains Powered |
|
Voltage |
220–240V |
|
Frequency |
50/60Hz |
|
Input Power |
550W |
|
Spraying Pressure |
0.1–0.2 Bar |
|
Maximum Flow |
850ml/min |
|
Maximum Viscosity |
50 DIN-s |
|
Container Capacity |
800ml |
|
Power Cord Length |
2.0m |
|
Included Accessory |
1 × Viscosity Measuring Cup |
|
Included Accessory |
1 × Nozzle Cleaning Needle |
|
Included Accessory |
1 × Shoulder Strap |
|
Packaging |
Color Box |
The provided data does not specify nozzle diameter, spray-pattern width, product weight, adjustable flow settings or compatibility with particular paint formulations.
These specifications should therefore not be inferred.
The ESGN50001 package includes three supporting accessories: a viscosity measuring cup, nozzle cleaning needle and shoulder strap. These additions address material checking, nozzle-related cleaning and handling respectively, giving buyers a clearly defined package configuration when comparing quotations or planning repeat procurement.
The supplied package consists of:
The viscosity measuring cup is relevant to the model's stated 50 DIN-s maximum viscosity.
The nozzle cleaning needle is supplied for nozzle-related cleaning requirements.
For additional accessories or replacement components not listed above, buyers should confirm requirements separately during procurement.
The ESGN50001 provides buyers with defined operating parameters rather than an unspecified general-purpose spraying configuration. Its 550W input, 850ml/min maximum flow, 800ml container, 50 DIN-s viscosity rating and 2.0m cord can be evaluated directly against workshop and project requirements before purchase.
The model may be particularly relevant where buyers require:
For procurement teams, these measurable specifications make model verification easier.
The product should still be evaluated according to the actual coating material, surface and work environment rather than selected on wattage alone.
IndustrialAdda supports B2B sourcing of the EMTOP ESGN50001 for workshops, manufacturers, fabricators, contractors and maintenance teams. Procurement assistance can cover model verification, quotation requests, quantity-based requirements and availability confirmation, while IndustrialAdda remains the supplier rather than the manufacturer or product developer.
A clear purchasing reference is:
Product: Spray Gun
Brand: EMTOP
Model: ESGN50001
Input Power: 550W
Maximum Flow: 850ml/min
Container: 800ml
Using the exact model number is particularly important where procurement documents contain several tools with similar product names.
IndustrialAdda supports industrial product sourcing for manufacturing, engineering, fabrication, construction, automotive workshops and MRO requirements.
Businesses can learn more about the supplier through the IndustrialAdda About Us page.
IndustrialAdda primarily supplies the Spray Gun to B2B customers across Delhi NCR. Requirements from other Indian locations can also be reviewed for eligible orders, particularly project or quantity-based purchases, subject to current availability, destination, quantity and applicable delivery conditions.
The primary regional supply area includes:
Typical enquiries may come from furniture workshops, fabrication units, automotive workshops, contractors, engineering companies and industrial maintenance departments.
No fixed stock level or delivery timeline is supplied for ESGN50001.
For project deadlines or repeat production requirements, buyers should confirm current availability before finalizing the purchasing schedule.
Pan-India supply remains subject to individual order requirements and availability.
Businesses requesting the ESGN50001 should provide the exact product and model reference, required quantity and delivery destination. Adding the intended coating application or relevant technical requirement can help clarify the enquiry before IndustrialAdda reviews quotation, availability and delivery conditions.
For an efficient enquiry, provide:
When purchasing for a workshop setup or larger project, buyers can also send multiple product codes or a complete BOM rather than submitting individual enquiries separately.
Submit the requirement through the IndustrialAddaContact Us page.
The ESGN50001 can be considered for compatible painting, furniture finishing, wood coating, metal finishing, cabinet spraying, panel coating, automotive refinishing and maintenance work. Its suitability should be evaluated against the actual coating material, particularly the stated maximum viscosity of 50 DIN-s, rather than assuming compatibility with every paint or coating.
The EMTOP ESGN50001 has a 550W input power, 0.1–0.2 Bar spraying pressure, 850ml/min maximum flow, 50 DIN-s maximum viscosity, 800ml container and 2.0m power cord. It operates from a 220–240V, 50/60Hz mains electrical supply.
Yes. The supplied package includes one viscosity measuring cup, one nozzle cleaning needle and one shoulder strap. The product is packed in a color box. No additional nozzles or other accessories are specified in the supplied information, so requirements beyond this package should be clarified separately.
The ESGN50001 has a stated maximum viscosity of 50 DIN-s. Viscosity describes the flow characteristics of the coating material and is therefore relevant when checking whether material is appropriate for spraying. A viscosity measuring cup is included with the product to support material assessment before application.
If your workshop, fabrication unit, furniture operation, maintenance department or project requires the EMTOP ESGN50001 Spray Gun, send IndustrialAdda the exact model number, quantity, delivery destination and intended coating application for procurement review. Buyers managing broader industrial purchases can also submit multiple product codes, technical specifications or a complete BOM for coordinated quotation assistance. IndustrialAdda can support requirements across Delhi NCR and review eligible Pan-India orders according to current product availability and applicable supply conditions.
| Voltage | 220-240V~50/60Hz |
|---|---|
| Input power | 550W |
| Spraying Pressure | 0.1-0.2Bar |
| Max flow | 850ml/min |
| Max. viscosity | 50DIN-s |
| Container capacity | 800ml |
| Power cord length | 2.0m |
| Accessories | 1x viscosity measuring cup 1x nozzle cleaning needle 1x shoulder strap |
| Packaging | Packed by color box |
IndustrialAdda supports B2B procurement enquiries for the Emtop ESGN50001 Spray Gun across Delhi NCR. Buyers can provide the exact model number, quantity, intended application and delivery destination when requesting quotation and current availability information.
IndustrialAdda can review quantity-based procurement requirements for workshops, fabrication businesses, furniture operations and maintenance teams. Buyers should specify ESGN50001, the required number of Spray Guns and delivery destination so availability and applicable commercial conditions can be reviewed against the actual requirement.
Eligible orders outside Delhi NCR may be reviewed for Pan-India supply depending on current product availability, order quantity, destination and applicable delivery conditions. Businesses should submit the exact ESGN50001 model reference and delivery location rather than assuming stock or dispatch timelines.
Provide IndustrialAdda with the Spray Gun ESGN50001 model reference, required quantity, application and delivery location. Procurement teams handling broader requirements can also submit additional model numbers, technical specifications or a BOM so related industrial products can be reviewed as part of the same quotation request.
Fill in your details and our B2B team will contact you shortly.
